Replaces

1982-92 Chevy Camaro Pontiac Firebird Window Sweep Pair - 1AWSK00155

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

This pair of Camaro or Firebird outer window sweeps (window felts) are the highest quality available. These are the strips that attach to the top of the door and "sweeps" the window as it goes up and down.

  • Features:
  • Exact Fit
  • Comes as a Pair
  • Look identical to the original
  • Prevent damaging water and debris from entering the door

If your outer window sweeps are cracked and allowing the elements into your door, these are for you!

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (1:22)
    • Disconnect the negative battery cable
  2. step : Removing the Door Panel (1:34)
    • Organize your parts and fasteners as you take things apart
    • Remove the fasteners from the door pull
    • Remove the door pull
    • Remove the fasteners from the door handle bezel
    • Disconnect the switches from their wiring harnesses
    • Remove the door handle bezel
    • Pry off the door panel with a putty knife or door panel removal tool
    • For more detailed instructions, please see the 1986 Camaro door panel replacement video
  3. step : Removing the Triangle Seal (2:46)
    • Remove two Phillips head screws from the weatherstrip
    • Carefully peal back the water shield
    • Remove the 10mm nuts from the triangle seal
    • Remove two 10mm bolts from the door
    • Pull out the triangle seal
  4. step : Removing the Window Sweep (5:16)
    • Remove the 10mm bolts from the window guides
    • Remove the window guides
    • Hold the window out of the way by hand
    • Use a 7mm wrench to remove the bolts from the window sweep
    • Pull the window sweep off by hand

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket
  • 8mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T27 Torx Driver
  • T10 Torx Driver

4.75/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
1
0
0
0
Pretty Nice
Worked fairly well overall but there were a couple holes that didnt quite line up with the factory holes in the door. I needed to expand these holes to get them to line up.
March 2, 2017
Good product
I had no issues with the fit and finish of this product
April 27, 2017
Great product
Installed on my 1988 Camaro. Very happy with the product. Looks great and fits like it should. Drivers side went on using the same screw holes as factory, all I had to do on the passenger side is drill the sweep to match the mounting holes in the door ( a couple holes were about 1/8" off). Making these fit was a breeze and I would buy again.
July 20, 2017
Very nice parts for a fair price
You have to appreciate that you can still get OEM quality parts of these crappy old camaros. Easy to order, great quality, and they look great on the fresh vinyl wrapped car.
September 26, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Holes dont line up on 84 Camaro. Whats the fix?
Jason S September 18, 2018
Holes didn’t line up on my 86 camaro either. I just drilled new holes
U S September 18, 2018
I drilled new holes in it to make it fit. It takes a good bit and some pressure since there’s metal inside it.
A B September 18, 2018
Dang! Its been about 18 months since I did mine on my 83 but I dont remember any trouble. Sorry I cant help more.
Richard F September 18, 2018
These parts are listed to be a direct replacement for the 1986 Chevy Camaro and should fit just like the original equipment. If you have purchased and find they are not fitting properly, please feel free to contact our customer service department so they can assist you further. Thank you and have a great day!
Jessica D September 19, 2018
Make sure you have the correct one for the side youre working on
Grant N September 19, 2018
They didnt quite line up on my 91 Firebird either. The joys of asian made parts. I elongated the holes with a round carbide cutter in my dremel too.
Zane M September 21, 2018
Year Make Model Description
1982-1992Chevy Camaro Chevy Camaro Outer Window Sweep Pair
1982-1992Pontiac Firebird Pontiac Firebird Outer Window Sweep Pair
Part #: 1AWSK00155


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:09 min)