Replaces

1982-92 Chevy Camaro Pontiac Firebird Triangle Weatherstrip Seal Pair Front Fairchild Automotive G4024, G4023 - 1AWSK00182

82-92 FIREBIRD CAMARO FRONT WINDOW TRIANGLE SEAL Pair. THIS IS THE SMALL SEAL THAT MOUNTS IN TO THE TRIANGLE AT THE FRONT OF THE DOOR. The front of the window slides up in to it when raised. When these parts dry up and wear out you will get wind noise from the front window. Stop that wind noise by replacing yours today.

Part Details

  • Front or Rear Location: Front
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

    It's recommended to mark bags and organize the parts accordingly as you remove them

  1. step : Removing the Door Panel (1:30)
    • Disconnect the negative battery cable
    • Remove the three T27 screws on the door pull
    • Remove the six T10 screws on the switch panel
    • Pull the lock button back
    • Disconnect the lock wiring harness with a flat blade screwdriver
    • Remove the T10 Torx screw behind the lock button
    • Remove the mirror control
    • Remove the retaining clip from the mirror control with a flat blade screwdriver
    • Pry behind the lock with a flat blade screwdriver
    • Slide the side panel back and out
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Lift up on the door molding and remove it
    • For more detailed instructions, please see the '86 Camaro IROC-Z door panel replacement video
  2. step : Removing the Triangle Seal (2:44)
    • Remove the two Phillips screws holding the top of the weatherstrip
    • Peel the top of the weatherstrip back
    • Carefully peel the water shield
    • Remove the 10mm nuts from the bracket attached to the triangle seal
    • Remove the two 10mm bolts from the door
    • Lift the triangle seal out of the door
  3. step : Separating the Triangle Seal (5:12)
    • Warm up both sides of the triangle seal with a heat gun
    • Pull the triangle seal off with a pair of pliers
    • You can try this process to skip removal of the door panel, though it is not recommended

Tools needed for replacement:

    General Tools

  • Heat Gun
  • Putty Knife

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 7mm Socket
  • 10mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver
  • T27 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench
  • 7mm Wrench
  • 8mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1982-1992Chevy Camaro Chevy Camaro Triangle Weatherstrip Seal Pair Front
1982-1992Pontiac Firebird Pontiac Firebird Triangle Weatherstrip Seal Pair Front

This part replaces:

  • Fairchild Automotive G4024, G4023
Part #: 1AWSK00182


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Fairchild Automotive
Brand #: G4024, G4023

How-to Video:

(08:19 min)