Replaces

1982-92 Chevy Camaro Pontiac Firebird Lift Support - 1ABHS00095

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Is your hatch not staying open anymore? The problem could be the lift supports mounted from the quarter panels to the hatch. These get weak over time and require replacing. No need to lose money at the dealer for this simple do it yourself replacement. Our lift supports are just what you need to allow your hatch to stay open again!

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side)
  • 100% tested prior to leaving the factory
  • Gas-Charged
  • Built to strict quality control standards
  • Commonly called "Rod Support" by GM
  • Correct for vehicles that do not have a rear spoiler or a rear wiper

This is for one support. We recommend replacing them in pairs.

Note:

It is necessary to reuse your original hardware, as new hardware is not included with this item.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Hatch Strut (1:21)
    • Raise the hatch
    • Disconnect the wiring harnesses at each end of the hatch strut
    • Prop the hatch up or have an assistant hold the hatch up
    • Remove the T50 Torx bolt from the bottom of the hatch strut
    • Remove the 8mm bolt from the top of the hatch strut
    • Pull out the hatch strut
  2. step : Installing the New Hatch Strut (2:55)
    • Put the new hatch strut into place with the bottom wiring contact facing the car interior
    • Start the T50 Torx bolt by hand
    • Connect the bottom wiring harness
    • Lift the top of the hatch strut to the hatch
    • Insert the 8mm bolt into the top of the hatch strut
    • Tighten the T50 Torx bolt
    • Connect the top wiring harness
    • Repeat these steps for the other side
    • Remove your prop
    • Close the hatch

Tools needed for replacement:

    General Tools

  • Assistant

  • Materials, Fluids, and Supplies

  • Block of Wood

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 8mm Socket

  • Torx Drivers & Sockets

  • T50 Torx Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1982-1992Chevy Camaro Chevy Camaro Hatch Lift Support without Spoiler for Models without Rear Wiper
1982-1992Pontiac Firebird Pontiac Firebird Hatch Lift Support without Spoiler for Models without Rear Wiper
Only 2 left in stock
Part #: 1ABHS00095


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:19 min)