Specifications

Brand New 18 Piece Weatherstrip Kit

  • Includes
    • (1) - Inner Header Seal for Removable Roof
      • Seals front of roof to body
    • (1) - Outer Header Seal for Removable Roof
      • Seals front of roof to body
    • (2) - Bed Side Seals - LH (Driver Side) & RH (Passenger Side)
      • Seals Sides of roof to quarter panels
    • (1) - Rear gate glass run channel Weatherstrip Seal
      • Mounts in Roof and seals rear window when in up position
    • (1) - Tailgate to Body Seal
      • Attaches to the sides and bottom of the tailgate and seal the tailgate to the body when closed
    • (1) - Inner Tailgate Window Sweep
      • This is the long rubber squeegee that attaches to the inside of the tailgate and sweeps the glass as it goes up and down
    • (1) - Outer Tailgate Window Sweep
      • This is the long rubber squeegee that attaches to the outside of the tailgate and sweeps the glass as it goes up and down
    • (2) - Front Door Window Run Channel Seals - LH (Driver Side) & RH (Passenger Side)
      • Seals door glass to doors when in up position
    • (2) - Front Door to Body Seals - LH (Driver Side) & RH (Passenger Side)
      • Attaches to the pinch weld and seal the doors as they close
    • (2) - Vent Glass Seals (two piece seal) - LH (Driver Side) & RH (Passenger Side)
      • Seals vent glass when closed
    • (2) - Outer Door Window Sweeps - LH (Driver Side) & RH (Passenger Side)
      • Sweeps door glass as it moves up and down
    • (2) - Inner Door Window Sweeps - LH (Driver Side) & RH (Passenger Side)
      • Sweeps door glass as it moves up and down
  • Fits Full Size SUVs with the removable roof
  • Fits models with 2 Piece Design Vent Window Seals only

Part Details

  • Quantity: 18 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:40)
    • Remove the screw behind the door handle.
    • Remove the door handle bezel.
    • Use a bent paper clip to remove the pin behind the window crank.
    • Remove the series of screws around the door panel.
    • Twist off the lock knob.
    • Lift the door panel up and off.
  2. step : Removing the Vent Window (2:37)
    • Remove the 7/16 bolt and three Phillips screws securing the vent window.
    • Remove the 5/16 bolt through the hole under the vent window.
    • Pull the vent window loose.
    • Remove the weather strip.
    • Remove the vent window by rotating it pulling the window from the bracket.
    • Crank up the window up as far as it goes.
    • Pull it back and up and out.
  3. step : Removal of the Weather Strips (6:57)
    • Remove the run channel weather strip from the vent window.
    • Remove the weather strip from the door panel by prying it out.
    • Follow Part 2 for the rest of the procedure.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Paper Clip

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - SAE

  • 5/16 Inch Socket
  • 7/16 Inch Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1981-1985 Chevy Blazer Full Size Complete Weatherstrip Seal Kit 18 Piece Set for Models with 2 Piece Vent Window Seal
  • 1981-1985 GMC Jimmy Full Size Complete Weatherstrip Seal Kit 18 Piece Set for Models with 2 Piece Vent Window Seal

This part replaces:

  • Metro Moulded Parts IS-LM 121
Part #: 1AWSK00404

How-to Video:

(08:02 min)