Replaces

1970-81 Chevy Camaro Pontiac Firebird Complete Weatherstrip Seal Kit - 1AWSK00349

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This 9 piece weatherstrip set consists of some of the most accurate reproductions on the market. Made with fine grain rubber and correct molded ends.

Specifications:

  • This 9 piece weatherstrip kit includes:
    • (2) - Door Seals
    • (2) - Roofrail Seals
    • (1) - Trunk Seal
    • (4) - Inner and Outer Window Sweeps for models with Decor Package
  • Inner Window Sweeps have the correct 5/16 inch flat stainless steel bead
  • Outer Window Sweeps are flocked rubber that first attach to your optional window sill molding, then the molding and weatherstrip attach to the vehicle
  • Molded ends exactly like the originals
  • Brand new in the package
  • Fits Hardtop Models only
    • Does NOT fit T-Top Models

If your weatherstripping is causing leaks allowing damaging rain in, then this seal kit is for you. Why not replace your old, hardened, rotted seals with these new, ready to install weatherstrips.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Dry Fitting the Trunk Weatherstrip (1:00)
    • Remove the trunk adhesive
    • Remove any rust or scale
    • Insert the weatherstrip with the thicker side down in
    • Push the lip so it sits on the top of the trunk, then push the lip down in
    • Use a plastic spoon or trim tool to keep from scratching
    • Repeat this process as you fit the weatherstrip around
    • Cut a quarter inch beyond where the seam is with a razor blade to match the weatherstrip
    • Close the trunk to check the weatherstrip placement
  2. step : Installing the Weatherstrip (5:40)
    • Pop open the trunk
    • Loosen the striker or latch bolts and slide the striker or latch up or down to adjust the trunk
    • If the weatherstrip keeps the trunk from closing, adjust the trunk so it sits on the weatherstrip
    • After the weatherstrip has pressed down, adjust the striker or latch back in place
    • Remove the weatherstrip
    • Line the outside of the trunk channel with painter's tape
    • Place adhesive inside the line of the trunk channel near the tape
    • Place adhesive on the side of the weatherstrip that will touch down in the channel
    • Insert the weatherstrip into place
    • Repeat the process for the rest of the weatherstrip
    • Trim off any excess near the end
    • Remove the painter's tape

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper
  • Wire Brush
  • Heat Gun

  • Materials, Fluids, and Supplies

  • Painter's Tape
  • Plastic Spoon

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1970-1981Chevy Camaro Chevy Camaro Hardtop Complete Weatherstrip Seal Kit for Models with Decor Trim
1970-1981Pontiac Firebird Pontiac Firebird Hardtop Complete Weatherstrip Seal Kit for Models with Decor Trim
Only 1 left in stock
Part #: 1AWSK00349


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:06 min)