Replaces

1969-70 Door, Convertible Top, and Trunk Weatherstrip Seal Kit - 1AWSK00194

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This basic set includes the door, convertible top, and trunk seals. These seals are the most accurate reproductions on the market. Comes as pair.

Features:

  • Molded ends exactly like the originals
  • Hardened plastic mounting pins
  • Smooth soft fine grain rubber

 

Fits 2 door convertible only.

Item Condition: New

WARNING:  This product can expose you to chemicals including Mercaptobenzothiazole, which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Dry Fitting the Trunk Weatherstrip (1:00)
    • Remove the trunk adhesive
    • Remove any rust or scale
    • Insert the weatherstrip with the thicker side down in
    • Push the lip so it sits on the top of the trunk, then push the lip down in
    • Use a plastic spoon or trim tool to keep from scratching
    • Repeat this process as you fit the weatherstrip around
    • Cut a quarter inch beyond where the seam is with a razor blade to match the weatherstrip
    • Close the trunk to check the weatherstrip placement
  2. step : Installing the Weatherstrip (5:40)
    • Pop open the trunk
    • Loosen the striker or latch bolts and slide the striker or latch up or down to adjust the trunk
    • If the weatherstrip keeps the trunk from closing, adjust the trunk so it sits on the weatherstrip
    • After the weatherstrip has pressed down, adjust the striker or latch back in place
    • Remove the weatherstrip
    • Line the outside of the trunk channel with painter's tape
    • Place adhesive inside the line of the trunk channel near the tape
    • Place adhesive on the side of the weatherstrip that will touch down in the channel
    • Insert the weatherstrip into place
    • Repeat the process for the rest of the weatherstrip
    • Trim off any excess near the end
    • Remove the painter's tape

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper
  • Wire Brush
  • Heat Gun

  • Materials, Fluids, and Supplies

  • Painter's Tape
  • Plastic Spoon

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1969-1970Buick LeSabre Buick LeSabre Door, Convertible Top, and Trunk Weatherstrip Seal Kit
1969-1970Buick Wildcat Buick Wildcat Door, Convertible Top, and Trunk Weatherstrip Seal Kit
1969-1970Chevy Impala Chevy Impala Door, Convertible Top, and Trunk Weatherstrip Seal Kit
1969-1970Oldsmobile 88 Olds 88 Door, Convertible Top, and Trunk Weatherstrip Seal Kit
1969-1970Oldsmobile Delta 88 Olds Delta 88 Door, Convertible Top, and Trunk Weatherstrip Seal Kit
1969-1970Pontiac Bonneville Pontiac Bonneville Door, Convertible Top, and Trunk Weatherstrip Seal Kit
1969-1970Pontiac Catalina Pontiac Catalina Door, Convertible Top, and Trunk Weatherstrip Seal Kit
Part #: 1AWSK00194

Out of Stock

How-to Video:

(12:06 min)