Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This set includes the door, convertible top, and trunk seals. These seals are the most accurate reproductions on the market.

Features:

  • Molded ends exactly like the originals
  • Hardened plastic mounting pins
  • Smooth soft fine grain rubber

Note: This kit contains the header seal that does not have the molded ends. It has the seal that is flat all the way across. This type is for the early production 1966 models. Please check your style prior to ordering.

Fits 2 door convertible only.

Item Condition: New

WARNING:  This product can expose you to chemicals including Mercaptobenzothiazole, which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Dry Fitting the Trunk Weatherstrip (1:00)
    • Remove the trunk adhesive
    • Remove any rust or scale
    • Insert the weatherstrip with the thicker side down in
    • Push the lip so it sits on the top of the trunk, then push the lip down in
    • Use a plastic spoon or trim tool to keep from scratching
    • Repeat this process as you fit the weatherstrip around
    • Cut a quarter inch beyond where the seam is with a razor blade to match the weatherstrip
    • Close the trunk to check the weatherstrip placement
  2. step : Installing the Weatherstrip (5:40)
    • Pop open the trunk
    • Loosen the striker or latch bolts and slide the striker or latch up or down to adjust the trunk
    • If the weatherstrip keeps the trunk from closing, adjust the trunk so it sits on the weatherstrip
    • After the weatherstrip has pressed down, adjust the striker or latch back in place
    • Remove the weatherstrip
    • Line the outside of the trunk channel with painter's tape
    • Place adhesive inside the line of the trunk channel near the tape
    • Place adhesive on the side of the weatherstrip that will touch down in the channel
    • Insert the weatherstrip into place
    • Repeat the process for the rest of the weatherstrip
    • Trim off any excess near the end
    • Remove the painter's tape

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper
  • Wire Brush
  • Heat Gun

  • Materials, Fluids, and Supplies

  • Painter's Tape
  • Plastic Spoon

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1966Buick LeSabre Buick LeSabre Convertible Weatherstrip Seal Kit
1966Buick Wildcat Buick Wildcat Convertible Weatherstrip Seal Kit
1966Chevy Bel-Air Chevy Bel-Air Convertible Weatherstrip Seal Kit
1966Chevy Biscayne Chevy Biscayne Convertible Weatherstrip Seal Kit
1966Chevy Caprice Chevy Caprice Convertible Weatherstrip Seal Kit
1966Chevy Impala Chevy Impala Convertible Weatherstrip Seal Kit
1966Oldsmobile 88 Olds 88 Convertible Weatherstrip Seal Kit
1966Oldsmobile Jetfire Olds Jetfire Convertible Weatherstrip Seal Kit
1966Oldsmobile Jetstar 88 Olds Jetstar 88 Convertible Weatherstrip Seal Kit
1966Pontiac Bonneville Pontiac Bonneville Convertible Weatherstrip Seal Kit
1966Pontiac Catalina Pontiac Catalina Convertible Weatherstrip Seal Kit
1966Pontiac Executive Pontiac Executive Convertible Weatherstrip Seal Kit
1966Pontiac Parisienne Pontiac Parisienne Convertible Weatherstrip Seal Kit
Part #: 1AWSK00192

Out of Stock

How-to Video:

(12:06 min)