Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This set includes the door, convertible and trunk seals. These seals are the most accurate reproductions on the market. Comes as a set.

Features:

  • Molded ends exactly like the originals
  • Hardened plastic mounting pins
  • Smooth soft fine grain rubber

 

Fits 2 door convertible.

Item Condition: New

WARNING:  This product can expose you to chemicals including Mercaptobenzothiazole, which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Dry Fitting the Trunk Weatherstrip (1:00)
    • Remove the trunk adhesive
    • Remove any rust or scale
    • Insert the weatherstrip with the thicker side down in
    • Push the lip so it sits on the top of the trunk, then push the lip down in
    • Use a plastic spoon or trim tool to keep from scratching
    • Repeat this process as you fit the weatherstrip around
    • Cut a quarter inch beyond where the seam is with a razor blade to match the weatherstrip
    • Close the trunk to check the weatherstrip placement
  2. step : Installing the Weatherstrip (5:40)
    • Pop open the trunk
    • Loosen the striker or latch bolts and slide the striker or latch up or down to adjust the trunk
    • If the weatherstrip keeps the trunk from closing, adjust the trunk so it sits on the weatherstrip
    • After the weatherstrip has pressed down, adjust the striker or latch back in place
    • Remove the weatherstrip
    • Line the outside of the trunk channel with painter's tape
    • Place adhesive inside the line of the trunk channel near the tape
    • Place adhesive on the side of the weatherstrip that will touch down in the channel
    • Insert the weatherstrip into place
    • Repeat the process for the rest of the weatherstrip
    • Trim off any excess near the end
    • Remove the painter's tape

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper
  • Wire Brush
  • Heat Gun

  • Materials, Fluids, and Supplies

  • Painter's Tape
  • Plastic Spoon

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1959-1960Buick Electra Buick Electra Convertible Weatherstrip Seal Kit
1959-1960Buick Invicta Buick Invicta Convertible Weatherstrip Seal Kit
1959-1960Buick LeSabre Buick LeSabre Convertible Weatherstrip Seal Kit
1959-1960Cadillac Eldorado Cadillac Eldorado Convertible Weatherstrip Seal Kit
1959-1960Cadillac Series 62 Cadillac Series 62 Convertible Weatherstrip Seal Kit
1959-1960Chevy Bel-Air Chevy Bel-Air Convertible Weatherstrip Seal Kit
1959-1960Chevy Impala Chevy Impala Convertible Weatherstrip Seal Kit
1959-1960Oldsmobile 88 Olds 88 Convertible Weatherstrip Seal Kit
1959-1960Oldsmobile 98 Olds 98 Convertible Weatherstrip Seal Kit
1959-1960Oldsmobile Dynamic Olds Dynamic Convertible Weatherstrip Seal Kit
1959-1960Oldsmobile Super 88 Olds Super 88 Convertible Weatherstrip Seal Kit
1959-1960Pontiac Bonneville Pontiac Bonneville Convertible Weatherstrip Seal Kit
1959-1960Pontiac Catalina Pontiac Catalina Convertible Weatherstrip Seal Kit
Part #: 1AWSK00203

Out of Stock

How-to Video:

(12:06 min)