Replaces

1997-2005 Buick Century Windshield Wiper Transmission

This part replaces:

  • HOLLANDER 621-00467
  • DORMAN 602-219
  • OE # 12336025

  • New

Snow, ice, dirt, and dust can interfere or damage your windshield wipers and the motion transmission mechanism. A bent or damaged link can cause the wipers to not work or work incompletely. These parts will also cause an annoying squeaking when they wear out. In general replacing windshield wiper transmission parts is not difficult. This may vary on some applications. It requires basic tools and removal and installation of small body parts such as cowl vent grilles. This replacement wiper transmission arm may be just what you need to get your windshield wiper system working properly again.

Specifications:

  • Complete Windshield Wiper Transmission Assembly
  • Replaces dealer part numbers: 12336025, 12336053
  • Direct bolt on
  • Built to strict quality control standards
  • Stamped construction

This wiper transmission arm makes a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Loosening the Steering Pump (0:40)
    • Have a drain pan ready
    • Disconnect the pressure line with an 11/16 wrench
    • Disconnect the pressure line fitting with an 11/16 wrench
    • Loosen the two bolts on the steering pump with a 9/16 inch wrench
    • Loosen the bolt with a 7/8 inch socket
  2. Removing the Serpentine Belt (2:03)
    • Loosen the 9/16 bolt on the alternator
    • Loosen the 1/4 inch bolt on the alternator
    • Remove the belt from the power steering pulley
  3. Removing the Power Steering Pump (2:32)
    • Remove the three bolts loosened on the power steering pump
    • Pull the power steering pump up and out
  4. Disassembling the Power Steering Pump (3:21)
    • Remove the spacer from the back of the steering pump
    • Remove the top of the steering pump
    • Pour any remaining fluid into the drain pan
    • Remove the 7/8 bolt from the steering pulley
    • Remove the four 9/16 bolts from the bracket
    • Remove the pressure line with a 5/8" wrench
    • Remove the clamp from the return line with a flat blade screwdriver
    • Break off the pinch clamps with pliers
    • Cut the fitting with a box cutter
    • Remove the fitting end
  5. Assembling the Power Steering Pump (5:30)
    • Push the return line into place
    • Clamp on the pinch clamp
    • Twist in the pressure line
    • Tighten the 9/16 bolts to the bracket
    • Push the steering pulley onto the pump
    • Push the washer on and tighten the 7/8 bolt to the steering pulley
  6. Reinstalling the Power Steering Pump (8:05)
    • Push the space on the back of the steering pump
    • Lower the steering pump into place
    • Preliminarily tighten the bolt on the front of the steering pump with a 9/16 inch wrench
    • Preliminarily tighten the bolt with a 7/8 inch socket
  7. Reinstalling the Serpentine Belt (9:20)
    • Wrap the belt around the water pump pulley
    • Bring it around the crank pulley
    • Bring it around the steering pump pulley
    • Pull and tighten the 9/16 bolt behind the pump
    • Tighten the remaining two bolts
    • Tighten the 9/16 bolt on the alternator
    • Tighten the 1/4 inch bolt on the alternator
  8. Connecting the Pressure Lines (11:09)
    • Connect the pressure line with an 11/16 wrench
    • Connect the pressure line fitting with an 11/16 wrench
    • Push the hose onto the fitting
    • Clamp on a pinch clamp to the fitting
  9. Refilling the Power Steering Pump Fluid (12:46)
    • Refill the steering pump reservoir to the recommend amount
    • Start the vehicle
    • Turn the vehicle off
    • Refill the reservoir
    • Repeat the process twice until the steering wheel can be moved easily
    • Turn the steering wheel back and forth
    • Refill the reservoir
    • Test drive the vehicle
    • Check the reservoir

Tools needed for replacement:

    Air Powered Tools

  • 3/8 Inch Air Impact Gun

  • General Tools

  • Drain Pan

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - SAE

  • 7/8 Inch Socket

  • Wrenches - SAE

  • 1/2 Inch Wrench
  • 11/16 Inch Wrench
  • 5/8 Inch Wrench
  • 7/8 Inch Wrench
  • 9/16 Inch Wrench

How-to Video:

(13:36 min)

Tools List:

    Air Powered Tools

  • 3/8 Inch Air Impact Gun

  • General Tools

  • Drain Pan

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - SAE

  • 7/8 Inch Socket

  • Wrenches - SAE

  • 1/2 Inch Wrench
  • 11/16 Inch Wrench
  • 5/8 Inch Wrench
  • 7/8 Inch Wrench
  • 9/16 Inch Wrench



This part replaces:

  • HOLLANDER 621-00467
  • DORMAN 602-219
  • OE # 12336025

Vehicle Fit

  • 1997-2005 Buick Century Windshield Wiper Transmission
  • 1997-2004 Buick Regal Windshield Wiper Transmission
  • 2000-2005 Chevy Impala Windshield Wiper Transmission
  • 2000-2005 Chevy Monte Carlo Windshield Wiper Transmission
  • 1998-2002 Olds Intrigue Windshield Wiper Transmission
  • 1997-2003 Pontiac Grand Prix Windshield Wiper Transmission
$115.45
Save 16%
List: $137.46 Save: $22.01
Part #: 1AWWT00096

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est