Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Item Condition:
New
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 1996 GMC Sierra. We're going to show you how to remove and replace your vehicle's washer fluid reservoir.
If you like this video, please click subscribe. We have a ton more information on this and many other vehicles. And if you need this part for your truck, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair: 7mm to 15mm socket, ratchet, socket extension, flat blade screwdriver, drain bucket
Open your storage box and remove the lid. There are two tabs located at the front that you'll want to pry out with a flat blade screw driver, lift up. Remove the 13 millimeter nut inside of the wheel with a 13 millimeter socket and ratchet. Remove the 10 millimeter bolt at the top of the washer fluid reservoir with a 10 millimeter socket and ratchet. Remove the 7 millimeter screw on the fill neck. Remove the fill neck from the reservoir. Remove the washer fluid reservoir.
Open your storage box and remove the lid. There are two tabs located at the front that you'll want to pry out with a flat blade screwdriver and lift up. Remove the 13 millimeter nut inside of the wheel well with a 13 millimeter socket and ratchet. Remove the 10 millimeter bolt at the top of the washer fluid reservoir with a 10 millimeter socket and ratchet.
Remove the 7 millimeter screw on the fill neck. Remove the fill neck from the reservoir. Remove the washer fluid reservoir. Make sure you have a drain bucket set up underneath there. You'll need to remove this cover.
The ends, unsnap with some tabs. Remove that. Disconnect the pump and the hose. Remove the pump from the reservoir. Remove the pump.
Here we have our old washer fluid reservoir that we removed from our vehicle, and our new parts from 1AAuto.com. As you can see these parts are exactly the same. We have the same size reservoir, same inlets with new gaskets, same pump location, single bolt mounting. And the bottom, we have the same locating pins. Even comes with a new filler neck, which will just pop right in, just like our old one popped out. Now, it's not uncommon for these to crack or break. So if yours has gone back and is leaking fluid, this new part from 1A Auto is going to go in direct fit, just like your original equipment, and fix you up right.
Reinstall the pump onto the washer line. Reinstall the pump into the washer. Snap the lines into place. Close the electrical connector. And our cover will hook back onto it's tabs.
Reinstall the washer reservoir. Reinstall the 10 millimeter hold down bolt, and tighten it down with a 10 millimeter socket and ratchet. Install the filler neck, as well as the 7 millimeter screw.
Reinstall the cargo box. Reinstall the 13 millimeter hold down nut. Reinstall the lid. Open the cap and refill your washer reservoir to capacity.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
