Replaces

2002-2004 Infiniti I35 Windshield Washer Reservoir with Pump & Low Fluid Sensor Provision

This part replaces:

  • OE # 28910-40U00, 28920-1E400
  • DORMAN
  • HOLLANDER 627-50242

  • New

Our aftermarket reservoirs are some of the highest quality replacements on the market!

This Nissan Maxima Windshield Washer Reservoir is a complete, ready to bolt on, direct replacement part.

Specifications

  • Includes washer pump
  • Has provision for low fluid sensor
  • Brand new in the box!
  • High quality item that is built to strict quality control standards
  • Direct bolt on
  • Does not include cap

Assembly replaces the following dealer part numbers:

  • 2891785E00, 2891040U00, 28910-40U00, 289111E400, 28911-1E400, 2891331U00, 28913-31U00, 2891340F00, 28913-40F00, 2891531U00, 28915-31U00, 2891540U00, 28915-40U00, 2891541U00, 28915-41U00, 2891543U00, 28915-43U00, 2891770F00, 28917-70F00, 28917-85E00, 289201E400, 28920-1E400, 2892150Y00, 28921-50Y00

Now you can buy a high quality reservoir that is built to strict quality control standards. This makes a great replacement and has great cost savings over a factory assembly.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Front Bumper Cover
    • Pry up the four bumper clips 1/8 inch with a flat blade screwdriver
    • Pull out the four bumper clips
    • Remove the two Phillips head screws from beneath the bumper cover
    • Pry up and remove the clips underneath the bumper cover
    • Pull back the inner fenders
    • Remove the first 10mm bolt inside each wheel well
    • Wrap a flat blade screwdriver with a rag to avoid chipping your paint
    • Pry out the side marker lights
    • Remove the second 10mm bolt inside each wheel well
    • Pull the bumper cover forward
    • Disconnect the fog light wiring harnesses
    • Pull the bumper cover off
  2. Removing the Windshield Washer Fluid Bottle
    • Have a drain pan ready
    • Disconnect the washer pump wiring connector
    • Lock the washer pump line
    • Pull the pump off
    • Allow the washer fluid to drain
    • Open the washer fluid bottle cap to allow the fluid to drain more quickly
    • Remove the washer fluid pump lines from the fluid bottle clips
    • Pull out the washer fluid bottle fill tube
    • Remove the three 10mm bolts from the washer bottle
    • Pull the washer bottle out
    • Disconnect the fluid level sensor with a flat blade screwdriver
  3. Installing the New Windshield Washer Fluid Bottle
    • Put the washer bottle into place
    • Hang the washer bottle from its bracket
    • Insert the three 10mm bolts into the washer bottle
    • Connect the fluid level sensor to the washer bottle
    • Connect the fluid pump to the washer bottle
    • Push the washer pump hoses onto their clips
    • Push the washer fluid fill neck into place
  4. Refilling the Windshield Washer Fluid
    • Fill the washer fluid bottle using a funnel
    • Put on the washer fluid fill neck cap
  5. Testing the Windshield Washers
    • Turn the vehicle's ignition on
    • Run the windshield washers
    • Check that they are working
    • Turn the ignition off
  6. Reinstalling the Front Bumper Cover
    • Lift the bumper cover into place
    • Connect the fog light wiring harnesses
    • Apply penetrating oil to the bumper clips and clean them
    • Insert the clips into the top of the bumper cover
    • Insert the 10mm bolts in the wheel well
    • Push the side marker lights into place
    • Push the inner fenders behind the bumper cover lip
    • Push the splash shield over the bumper cover
    • Insert the clips underneath the bumper cover
    • Insert the Phillips screws underneath the bumper cover

How-to Video:

(12:48 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Drain Pan
  • Funnel



This part replaces:

  • OE # 28910-40U00, 28920-1E400
  • DORMAN
  • HOLLANDER 627-50242

Vehicle Fit

  • 1996-2001 Infiniti I30 Windshield Washer Reservoir with Pump & Low Fluid Sensor Provision
  • 2002-2004 Infiniti I35 Windshield Washer Reservoir with Pump & Low Fluid Sensor Provision
  • 1994-2003 Nissan Maxima Windshield Washer Reservoir with Pump & Low Fluid Sensor Provision
$45.45
Save 60%
List: $114.58 Save: $69.13
Part #: 1AWWR00001

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est