Replaces

1993-2011 Ford Ranger Power Window Regulator (without Motor) Front Passenger Side

Part Details

  • Operation: Power
  • Location: Passenger Side
  • Location: Front

This part replaces:

  • OE # 3L5Z 1023208 AA, ZZM1-58-560B
  • HOLLANDER 125-01768R
  • PARTSLINK FO1351113
  • DORMAN 740-832

  • New

Specifications:

  • RH (Passenger Side) FRONT
  • Does NOT include the power window motor
  • Replaces dealer part numbers: 3L5Z-1023208-AA, ZZM1-58-560B, 3L5Z1023208AA, ZZM158560B
  • Direct replacement
  • Built to strict quality control standards

Please Note: This High Quality power window regulator is a new aftermarket replacement part that is built to strict quality control standards. It is far superior to the lower quality window regulators which have begun to appear on the internet. Although this window regulator is produced overseas, it was designed in the U.S. and the tooling is owned by a large U.S. manufacturer. That is why we guarantee this high quality window regulator with a superior warranty! If price is your main concern, we do offer the lower price overseas designed and built window regulator in our other listings.

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it, you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

 

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. disconnect the battery
    • Use your 8 mm wrench to disconnect the negative battery terminal
  2. Remove the door panel
    • Remove the two Phillips screws under the door pull.
    • Remove the door pull panel and unplug the wiring harness.
    • Unscrew two more Phillips screws.
    • Pull the door panel up and off.
    • Carefully remove the water shield
  3. Remove the window regulator
    • Disconnect the window regulator harness.
    • Remove the window from the regulator by drilling out the rivets.
    • Tape the window up and secure out of the way.
    • Remove the rivets mounting the window regulator by drilling them out with a 3/8 drill bit.
    • Carefully finesse the regulator out of the door.
  4. Install the new window regulator
    • Place the regulator into the door
    • Replace the bolts and lock nuts and tighten.
    • Plug in the wiring harness.
    • Carefully un-tape the window and bolt the window into the regulator.
    • Test the regulator before reassembling the door panel.
    • See our other videos for more detailed door panel reassembly instructions.
    • Reconnect the negative battery terminal with your 8 mm wrench

How-to Video:

(07:48 min)

Tools List:

    Drills, Drill Bits & Related

  • 3/8 Inch Drill Bit

  • Materials, Fluids, and Supplies

  • Painter's Tape

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 8mm Wrench



This part replaces:

  • OE # 3L5Z 1023208 AA, ZZM1-58-560B
  • HOLLANDER 125-01768R
  • PARTSLINK FO1351113
  • DORMAN 740-832

Vehicle Fit

  • 1993-2011 Ford Ranger Power Window Regulator (without Motor) Front Passenger Side
  • 1994-2010 Mazda B2300 Truck Power Window Regulator (without Motor) Front Passenger Side
  • 1994-2010 Mazda B2500 Truck Power Window Regulator (without Motor) Front Passenger Side
  • 1994-2010 Mazda B3000 Truck Power Window Regulator (without Motor) Front Passenger Side
  • 1994-2010 Mazda B4000 Truck Power Window Regulator (without Motor) Front Passenger Side
$38.45
Save 54%
List: $82.80 Save: $44.35
Part #: 1AWRG00327

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est