Replaces

1997-2002 Pontiac Grand Prix 2 Door Coupe Power Window Regulator (without Motor) Pair

Part Details

  • Operation: Power
  • Quantity: Pair

  • New

These replacement power window regulators are just what you need to get your vehicle in good shape again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Power operation
  • Replaces dealer part numbers: 10309979, 10309980
  • Do NOT include power window motors
  • Direct replacements
  • Built to strict quality control standards
  • Fit 2 Door Models only

These window regulators make great replacements and have substantial cost savings over dealer units.

Please Note: This High Quality power window regulator is a new aftermarket replacement part that is built to strict quality control standards. It is far superior to the lower quality window regulators which have begun to appear on the internet. Although this window regulator is produced overseas, it was designed in the U.S. and the tooling is owned by a large U.S. manufacturer. That is why we guarantee this high quality window regulator with a superior warranty! If price is your main concern, we do offer the lower price overseas designed and built window regulator in our other listings.

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money,and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
  • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it, you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the door panel (1:00 in the video)
    • Check out our other videos for detailed instructions on how to do this.
    • Carefully peel back your water shield.
    • Disconnect the side mirror connection.
  2. Remove the window regulator (2:05 in the video)
    • Carefully pull the foam block out of the door.
    • Tape your window up and remove the two 10 mm bolts to release the regulator from the window glass.
    • Unbolt the window regulator and the motor.
    • Disconnect the window motor connection.
    • Carefully pull the window regulator assembly out of the door.
  3. install the new window actuator (4:59 in the video)
    • Feed the window actuator into the door.
    • Bolt the actuator and motor into the door.
    • Connect the power window motor harness.
    • Untape the window and lower it into the power window regulator track.
    • Secure the window with the 10mm bolts.
    • Connect the power window switch to test.
    • Replace the sound deadening foam block.
    • Put the water shield back onto the door.
  4. install the door panel (9:57 in the video)
    • Connect the side mirror wiring connection.
    • Check out our other videos for more detailed door panel installation instructions.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Putty Knife

  • Torx Drivers & Sockets

  • T27 Torx Driver

How-to Video:

(11:01 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Putty Knife

  • Torx Drivers & Sockets

  • T27 Torx Driver




Vehicle Fit

  • 2000-2007 Chevy Monte Carlo Power Window Regulator (without Motor) Pair
  • 1997-2002 Pontiac Grand Prix 2 Door Coupe Power Window Regulator (without Motor) Pair
$70.45
Save 92%
List: $831.84 Save: $761.39
Part #: 1AWRK00828

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est