Replaces

2002-2010 Mercury Mountaineer Power Window Regulator with Motor Front Driver Side (High Quality)

Part Details

  • Part Type: High Quality
  • Operation: Power
  • Side Location: Driver Side
  • Front / Rear Location: Front

This part replaces:

  • DORMAN 741-813
  • HOLLANDER 125-2816 , 125-2040
  • OE # 4L2Z 7823201 BA

  • New

Specifications:

  • Fits LH (Driver Side) FRONT
  • Includes power window motor
  • Direct replacement
  • Replaces dealer part number: 4L2Z-7823201-BA, 4L2Z7823201BA
  • Built to strict quality control standards

Please Note: This High Quality power window regulator is a new aftermarket replacement part that is built to strict quality control standards. It is far superior to the lower quality window regulators which have begun to appear on the internet. Although this window regulator is produced overseas, it was designed in the U.S. and the tooling is owned by a large U.S. manufacturer. That is why we guarantee this high quality window regulator with a superior warranty! If price is your main concern, we do offer the lower price overseas designed and built window regulator in our other listings.

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it, you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Door Panel (0:47 in the video)
    • Turn off your courtesy lights
    • Pry off the door handle trim piece with a flat blade screwdriver
    • Pry up the window switch panel
    • Disconnect the wiring harnesses
    • Remove the 7mm bolt in the door handle
    • Remove the two 7mm bolts at the bottom of the door panel
    • Pry out the mirror switch with a flat blade screwdriver
    • Disconnect the mirror switch wiring harness
    • Lift the door panel up and off
    • Disconnect the trunk switch wiring harness
    • Carefully peel off the water shield
  2. Removing the Window Regulator (3:18 in the video)
    • Drill out the rivets that hold the window to the regulator
    • Raise the window by hand
    • Remove the weatherstrip
    • Angle the window down and pull the window up and out
    • Unclip the lock harness from the regulator
    • Remove the five 11mm bolts from the regulator
    • Disconnect the window motor lead
    • Unclip the lock rod
    • Pull the window regulator out through the door
    • Remove the stud with an E5 Torx bit
    • Grab the flange behind the stud with locking pliers and remove the stud
  3. Preparing the Regulator (7:08 in the video)
    • Remove the Torx bolt from the window motor with an E5 Torx bit
    • Insert and tighten the Torx bolt to the new window motor
  4. Reinstalling the Regulator (7:43 in the video)
    • Push the regulator into the door
    • Insert the five 11mm bolts into the regulator
    • Connect the door lock rod
    • Clip the lock harness to the regulator
    • Connect the window motor lead
    • Lower the window onto the regulator
    • Pry off the speaker cover
    • Remove four 6mm screws from the speaker
    • Disconnect the speaker wiring lead
    • Pull off the speaker
    • Insert short bolts, lock washer, and nuts to hold the window to the regulator
  5. Reinstalling the Door Panel (10:05 in the video)
    • Put the water shield into place
    • Connect the speaker wiring lead
    • Put the speaker into place
    • Insert the four 6mm bolts into the speaker
    • Replace the weatherstrip
    • Connect the trunk switch wiring harness
    • Lift the door panel into place
    • Replace the 7mm bolt in the door handle
    • Replace the two 7mm bolts at the bottom of the door panel
    • Connect the mirror switch wiring harness
    • Push in the mirror switch
    • Connect the wiring harnesses to the switch panel
    • Push in the window switch panel
    • Push in the door handle trim piece

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 3/8 Inch Drill Bit
  • Drill

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 11mm Socket
  • 6mm Socket
  • 7mm Socket

  • Torx Drivers & Sockets

  • E5 Inverted Torx Socket

  • Wrenches - Metric

  • 11mm Wrench

How-to Video:

(12:18 min)

Tools List:

    Drills, Drill Bits & Related

  • 3/8 Inch Drill Bit
  • Drill

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 11mm Socket
  • 6mm Socket
  • 7mm Socket

  • Torx Drivers & Sockets

  • E5 Inverted Torx Socket

  • Wrenches - Metric

  • 11mm Wrench



This part replaces:

  • DORMAN 741-813
  • HOLLANDER 125-2816 , 125-2040
  • OE # 4L2Z 7823201 BA

Vehicle Fit

  • 2002-2010 Ford Explorer 4 Door Power Window Regulator with Motor Front Driver Side (High Quality)
  • 2007-2010 Ford Explorer Sport Trac Power Window Regulator with Motor Front Driver Side (High Quality)
  • 2002-2010 Mercury Mountaineer Power Window Regulator with Motor Front Driver Side (High Quality)
$70.45
Save 44%
List: $126.00 Save: $55.55
Part #: 1AWRG00205

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est