Replaces

1997-1999 Olds Cutlass Front Wheel Hub & Outer Tie Rod (Set of 4) (excluding Supreme Models)

Part Details

  • Quantity: Set of 4

  • New

This replacement front hub and tie rod kit is just what you need to get your vehicle in good working order again!

Wheel Hub Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 88957259
  • 3 Bolt Flange Hub (Bolts to Steering Knuckle with 3 Bolts)
  • Fits 5 Lug Wheel
  • Wheel Mounting Studs already installed
  • Includes ABS Sensor and Plug Wire

Tie Rod Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT OUTER
  • Replaces dealer part numbers: 26055104, 26086073
  • Comes as shown with greasable joint
  • Direct replacement
  • Built to strict quality control standards

Note: For the 2004-05 Malibu Classic requiring a VIN (Vehicle Identification Number), please match the 4th digit of your VIN number to the VIN code on your title. Your vehicles VIN number can be found in the lower left corner of the windshield or on your registration.

This kit is a great replacement and has good cost savings over dealer units.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Install the hub (1:25 in the video)
    • Thread through the ABS harness.
    • Start the bolts and make sure the shield plate is in the correct place.
    • Turn the wheel as needed to get better access to thread in the bolts.
    • Torque the bolts between 55-60 foot pounds.
    • Connect the ABS harness and clip the bracket in place.
  2. Reassemble the brakes. (5:20 in the video)
    • Put the rotor back on.
    • Secure the caliper onto the brake disk.
    • Bolt into place and torque to 55 ft lbs.
  3. Put the wheel back on (6:15 in the video)
    • Torque the lug nuts to 75 ft lbs.
    • The center hub nut should be torqued to 85 ft lbs.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 34mm Socket
  • 35mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands

How-to Video:

(08:02 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 34mm Socket
  • 35mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands




Vehicle Fit

  • 2004 Chevy Classic Front Wheel Hub & Outer Tie Rod (Set of 4) for Models with ABS
  • 1997-2003 Chevy Malibu Front Wheel Hub & Outer Tie Rod (Set of 4) for Models with ABS
  • 1999-2004 Olds Alero Front Wheel Hub & Outer Tie Rod (Set of 4)
  • 1997-1999 Olds Cutlass Front Wheel Hub & Outer Tie Rod (Set of 4) (excluding Supreme Models)
  • 1999-2005 Pontiac Grand Am Front Wheel Hub & Outer Tie Rod (Set of 4)
$99.95
Part #: 1AHTF00001

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est