1997-2003 Chevy Malibu Front Wheel Hub & Outer Tie Rod (Set of 4) for Models with ABS1AHTF00001
- Quantity: Set of 4
This replacement front hub and tie rod kit is just what you need to get your vehicle in good working order again!
Wheel Hub Specifications:
- Comes as a PAIR
- Fits both LH (Driver Side) & RH (Passenger Side) FRONT
- Replaces dealer part number: 88957259
- 3 Bolt Flange Hub (Bolts to Steering Knuckle with 3 Bolts)
- Fits 5 Lug Wheel
- Wheel Mounting Studs already installed
- Includes ABS Sensor and Plug Wire
Tie Rod Specifications:
- Comes as a PAIR
- Fits both LH (Driver Side) & RH (Passenger Side) FRONT OUTER
- Replaces dealer part numbers: 26055104, 26086073
- Comes as shown with greasable joint
- Direct replacement
- Built to strict quality control standards
Note: For the 2004-05 Malibu Classic requiring a VIN (Vehicle Identification Number), please match the 4th digit of your VIN number to the VIN code on your title. Your vehicles VIN number can be found in the lower left corner of the windshield or on your registration.
This kit is a great replacement and has good cost savings over dealer units.
2 Year Warranty
This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
Install the hub
- Thread through the ABS harness.
- Start the bolts and make sure the shield plate is in the correct place.
- Turn the wheel as needed to get better access to thread in the bolts.
- Torque the bolts between 55-60 foot pounds.
- Connect the ABS harness and clip the bracket in place.
Reassemble the brakes.
- Put the rotor back on.
- Secure the caliper onto the brake disk.
- Bolt into place and torque to 55 ft lbs.
Put the wheel back on
- Torque the lug nuts to 75 ft lbs.
- The center hub nut should be torqued to 85 ft lbs.
How-to Video:(08:02 min)
- Lug Wrench
- Breaker Bar
- Socket Extensions
- Torque Wrench
- Flat Blade Screwdriver
- 13mm Socket
- 19mm Socket
- 32mm Socket
- 34mm Socket
- 35mm Socket
- Floor Jack
- Jack Stands
Pliers, Cutters & misc Wrenches
Ratchets & Related
Screwdrivers & Related
Sockets - Metric
- 2004 Chevy Classic Front Wheel Hub & Outer Tie Rod (Set of 4) for Models with ABS
- 1997-2003 Chevy Malibu Front Wheel Hub & Outer Tie Rod (Set of 4) for Models with ABS
- 1999-2004 Olds Alero Front Wheel Hub & Outer Tie Rod (Set of 4)
- 1997-1999 Olds Cutlass Front Wheel Hub & Outer Tie Rod (Set of 4) (excluding Supreme Models)
- 1999-2005 Pontiac Grand Am Front Wheel Hub & Outer Tie Rod (Set of 4)
Part #: 1AHTF00001
- Ships Same Day for orders placed by 5 P.M. ET
Free GROUND SHIPPINGCheck Shipping Rates
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."- Dwuan M.