Replaces

1997-1997 Olds Cutlass Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set (excluding Supreme Models)

  • New

This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT Brake Pad Set
  • Replaces dealer part numbers: 18024383, 18025186, 18026185, 18026186, 18044437
  • Includes Shims

Brake Rotor Specifications:

  • Come as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 12062056, 19152703
  • Fits 5 Stud Wheels
  • Vented
  • 10.94" Diameter

Wheel Bearing & Hub Assembly Specifications:

  • Come as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Flanges
  • Includes ABS Sensor and Plug Wire
  • Replaces dealer part number: 88957259
  • Fit 5 Lug Wheels
  • Studs already installed

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Remove front wheel.
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your lug wrench to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your lug wrench.
    • Remove the wheel and set aside.
  2. Step 2: Remove the front brake calipers
    • Use a screwdriver to force the pistons back in.
    • Remove the two 12mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 15mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. Step 3: Install new brake rotor and pads
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 55-60 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 20 ft lbs.
  4. Step 5: Put your front wheel back on
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 75-85 ft lbs.
    • Replace hubcap/center cap.
  5. Step 6: Test and set brake pads and rotors
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

How-to Video:

(10:16 min)

Tools List:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Breaker Bar
  • Ratchet

  • Sockets - Metric

  • 12mm Socket
  • 15mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Wire Brush




Vehicle Fit

  • 2004-2005 Chevy Classic Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 1997-2003 Chevy Malibu Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 1999-2004 Olds Alero Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 1997 Olds Cutlass Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set (excluding Supreme Models)
  • 1998-1999 Olds Cutlass Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 1999-2005 Pontiac Grand Am Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
$140.45
Part #: 1ABMS00006

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est