Replaces

1998-2004 GMC S-15 Sonoma 4WD Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set

Part Details

  • Location: Front

  • New

This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • Fits FRONT Rotors
  • 4 Piece Brake Pad Set
  • No core charge
  • Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 18060691, 15733699, 18060219
  • Fit 5 Lug Wheels
  • 10.76" (275mm) Diameter Vented Rotor

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 12413045
  • Have ABS sensors
  • Built to strict quality control standards

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel (1:09 in the video)
    • Loosen the lug nuts with your 19 mm socket and breaker bar.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. Remove the caliper, pads and rotors (1:26 in the video)
    • Observe your brake pads and rotors; check the wear indicator on the pads and look for deep gouges or excessive wear on the rotors.
    • Unbolt the 18 mm caliper bolts.
    • Use a large flat blade screwdriver to compress the caliper piston to pull the caliper off the rotor.
    • Remove the brake pads.
    • Take your 19 mm socket and breaker bar to unbolt the caliper bracket bolts.
    • Remove and discard your old rotor.
  3. Replace your pads and rotors (5:11 in the video)
    • Clean your rotor with brake parts cleaner and place it on the hub.
    • Bolt down the caliper bracket with your 19 mm socket and ratchet.
    • Torque the 19 mm bolts to 100 ft lbs.
    • Dab a bit of anti-seize grease to the edges of the brake pads and place them into the caliper brackets against the rotors.
    • Compress your brake caliper piston with a large c-clamp.
    • Mount the brake caliper onto the caliper bracket.
    • Bolt the caliper down with an 18 mm socket and ratchet.
    • Torque the 18 mm bolts to 55 ft lbs.
  4. Replace the wheel (8:46 in the video)
    • Put the wheel back on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs in a star pattern.
    • Pump the brakes a few times and do a few 5-10 mph stops in the driveway before test driving the vehicle.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Wrenches - Metric

  • 18mm Wrench

How-to Video:

(09:35 min)

Tools List:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Wrenches - Metric

  • 18mm Wrench




Vehicle Fit

  • 1997 Chevy Blazer S10 Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for Models with 4 Wheel Disc Brakes for 4 Wheel Drive
  • 1998-2005 Chevy Blazer S10 4WD Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 1998-2004 Chevy S10 Pickup 4WD Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 1997 GMC Jimmy S-15 Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for Models with 4 Wheel Disc Brakes for 4 Wheel Drive
  • 1998-2001 GMC Jimmy S-15 4WD Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 1998-2004 GMC S-15 Sonoma 4WD Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 1998-2000 Isuzu Hombre 4WD Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
  • 1997-2001 Olds Bravada Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set
$145.45
Part #: 1ABMS00015

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est