Replaces

2003-2006 Chevy SSR Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)

Part Details

  • Location: Rear
  • Brands: Timken

This part replaces:

  • Timken 513067
  • OE # 12479031, 9442126, 8094421260

  • New

TIMKEN WHEEL BEARING: 513067

This replacement wheel bearing is just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Wheel Bearing
  • Fits either LH (Driver Side) or RH (Passenger Side) REAR
  • Replaces dealer part numbers: 80944-21260, 9442126, 12479031, 8094421260
  • Direct replacement
  • Built to strict quality control standards
  • Fits models with 8.5" Ring Gear only

This wheel bearing makes a great replacement and has good cost savings over the dealer part!

Note: This part is an authentic Timken brand product that is supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Quality
  • 1A Auto exclusive 2 Year Warranty.
    • If this bearing should fail to provide satisfactory performance you may exchange it.
  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto bearings are all tested prior to shipping.
Fit Guaranteed
  • This hub bearing will install just as your original does. You can use your existing hub & hardware.
  • We also have plenty of installation videos to help you get the job done right the first time.

Value
  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:36 in the video)
    • Loosen the lug nut covers with a 22mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Brake Pads (0:59 in the video)
    • Remove the two 12mm bolts from the brake caliper
    • Push in the brake caliper pistons with a large C-clamp
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. Removing the Brake Rotor (1:43 in the video)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  4. Removing the Differential Cover (2:15 in the video)
    • Remove severe rust from the differential cover bolts with a hammer and chisel
    • Remove all but the bottom 13mm bolts from the differential cover
    • If removing rust made the bolts smaller, hammer a 1/4 inch socket onto the bolts
    • Have a drain pan ready
    • Remove the bottom 13mm bolts from the differential cover
    • Pry out the bottom of the differential cover with the hammer and chisel
    • Thread the top 13mm bolt into the differential cover
    • Allow the fluid to drain
    • Pry out the bottom of the differential cover with the chisel
    • Remove the top 13mm bolt
    • Pull the differential cover down and out
  5. Cleaning the Differential (5:05 in the video)
    • Clean any debris out of the differential with a vacuum
    • Clean the differential with a cloth rag
    • Scrape off the old differential cover gasket with a razor blade
    • Clean any residue with a wire brush
  6. Removing the Axle (5:44 in the video)
    • Put the vehicle in neutral
    • Turn the differential chuck by hand so the 8mm bolt is visible
    • Remove the 8mm bolt
    • Pull the pin out of the differential
    • Push the axle in
    • Turn the driveshaft by hand until the small axle C-clamps are visible
    • Remove the C-clamp with a magnet
    • Pull the axle out
  7. Removing the Axle Bearing (6:45 in the video)
    • Put the correct size bearing puller into place
    • Thread the nut on the axle puller
    • Pull the bearing with the bearing puller
  8. Installing the New Axle Bearing (7:48 in the video)
    • Put the new bearing into place
    • Hammer the bearing into place with a bearing installation tool and hammer
    • Drive the bearing in to the positioning line
    • Apply gear oil to the bearing
    • Tap in the bearing seal with a hammer
  9. Reinstalling the Axle (8:57 in the video)
    • Slide the axle into place, being sure not to drag it on the bearing seal
    • Push the axle into the differential
    • Insert the C-clamp onto the axle
    • Pull the axle out
    • Insert the pin into the differential
    • Insert the 8mm bolt into the differential
  10. Preparing the Differential Cover (10:45 in the video)
    • Apply RTV to the new differential cover
    • Place the gasket onto the differential cover, lining up the bolt holes
    • Apply RTV to the gasket
  11. Reinstalling the Differential Cover (11:04 in the video)
    • Clean any fluid off of the mounting surface with a cloth rag
    • Put the differential cover into place
    • Thread the top 13mm bolt into the differential cover
    • Thread the remaining 13mm bolts
    • Replace the wiring harness connected to one of the top bolts
    • Let the RTV set
    • Tighten the 13mm bolts to 15 foot-pounds of torque in a crossing pattern
  12. Refilling the Differential (12:17 in the video)
    • Remove the filler plug with a 3/8 inch ratchet
    • If necessary, hammer the ratchet into the plug
    • Add fluid to the differential until it drips out the fill hole
    • Check that the fluid level is up to the fill hole
    • Tighten the fill plug into the fill hole
  13. Reinstalling the Brake Rotor (13:19 in the video)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the 18mm bolts to 85 foot-pounds of torque
  14. Reinstalling the Brake Pads (14:12 in the video)
    • Install the brake pads into the bracket
    • Put the caliper on
    • Thread the 12mm bolts by hand
    • Tighten the 12mm bolts to 30 foot-pounds
  15. Reattaching the Wheel (14:45 in the video)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket
  16. Testing the Brakes (15:23 in the video)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Cloth Rags
  • Gear Oil
  • RTV

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • 3/8 Inch Drive Ratchet
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 18mm Socket
  • 22mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Chisel
  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Magnet - Extendable
  • Race Installation Tools
  • Razor Blade / Gasket Scraper
  • Wire Brush

  • Wrenches - Metric

  • 8mm Wrench

How-to Video:

(15:54 min)

Tools List:

    Materials, Fluids, and Supplies

  • Cloth Rags
  • Gear Oil
  • RTV

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • 3/8 Inch Drive Ratchet
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 18mm Socket
  • 22mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Chisel
  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Magnet - Extendable
  • Race Installation Tools
  • Razor Blade / Gasket Scraper
  • Wire Brush

  • Wrenches - Metric

  • 8mm Wrench



This part replaces:

  • Timken 513067
  • OE # 12479031, 9442126, 8094421260

Vehicle Fit

  • 2004-2007 Buick Rainier Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1999-2000 Cadillac Escalade Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2002-2013 Cadillac Escalade Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2003-2005 Chevy Astro Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2002-2013 Chevy Avalanche 1500 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1990-1993 Chevy Blazer Full Size Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1988-1999 Chevy C1500 Truck Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2004-2012 Chevy Colorado Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1996-2013 Chevy Express 1500 Van Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1988-1999 Chevy K1500 Truck Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1995-2003 Chevy S10 Pickup Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2003-2006 Chevy SSR Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1999-2013 Chevy Silverado 1500 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2005-2006 Chevy Silverado Hybrid Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2000-2013 Chevy Suburban 1500 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2000-2013 Chevy Suburban 2500 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1992-1999 Chevy Suburban C1500 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1992-1999 Chevy Suburban C2500 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1992-1999 Chevy Suburban K1500 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1992-1999 Chevy Suburban K2500 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1995-2013 Chevy Tahoe Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2002-2009 Chevy Trailblazer Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2003-2005 Chevy Trailblazer EXT Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1988-1999 GMC C1500 Truck Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2004-2012 GMC Canyon Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2002-2009 GMC Envoy Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2003-2004 GMC Envoy XL Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1992-1994 GMC Jimmy S-15 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1988-1999 GMC K1500 Truck Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1995-2003 GMC S-15 Sonoma Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2003-2005 GMC Safari Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1996-2013 GMC Savana 1500 Van Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1999-2013 GMC Sierra 1500 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2004-2010 GMC Sierra Denali 1500 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1988-1999 GMC Suburban Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 1992-2013 GMC Yukon Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2000-2013 GMC Yukon XL 1500 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2001 GMC Yukon XL 2500 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2001-2013 GMC Yukon XL Denali Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2006-2010 Hummer H3 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2009-2010 Hummer H3T Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2003-2008 Isuzu Ascender Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2006 Isuzu i-280 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2007-2008 Isuzu i-290 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2006 Isuzu i-350 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2007-2008 Isuzu i-370 Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2002-2004 Olds Bravada Rear Wheel Bearing for Models with 8.5" Ring Gear (Timken)
  • 2005-2009 Saab 9-7X Rear Wheel Bearing (Timken)
$49.95
Save 24%
List: $66.00 Save: $16.05
Part #: TKAXX00076

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
TIMKEN
Brand #: 513067

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est