Replaces

1993-1999 Buick LeSabre Wheel Bearing & Hub Assembly Rear Pair

  • New

Specifications:

  • Comes as a PAIR:
    • Includes both the LH (Driver Side) & RH (Passenger Side) REAR
  • Direct replacements
  • Replaces OE# 7470540
  • Includes ABS sensors
  • Built to strict quality control standards

 

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

 

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (1:02)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Brake Drum (1:18)
    • Spray rust penetrant on the lug studs
    • Pry off the drum with flat blade screwdrivers
    • Pull off the drum
  3. Removing the Brake Shoes (1:44)
    • Remove the brake shoe springs with the vise grip pliers
    • Hold the front retaining pin in place by hand
    • Pry out the front retaining spring with a flat blade screwdriver
    • Remove the brake shoe
    • Remove the brake adjuster
    • Pry the emergency brake cable out of the front brake shoe
  4. Removing the Wheel Hub (3:14)
    • Disconnect the wheel speed sensor wiring harness
    • Loosen the four T50 Torx bolts from the wheel hub
    • Loosen the wheel hub with a hammer and chisel
    • Remove the four T50 Torx bolts from the wheel hub
    • Pry out the hub with a pry bar
    • Clean the wheel spindle with a wire brush
  5. Installing the New Wheel Hub (4:54)
    • Put the hub into place with the wheel speed sensor toward the back of the car
    • Insert the four T50 bolts into the wheel hub
    • Tighten the T50 bolts to 45 foot-pounds of torque
  6. Installing the New Brake Shoes (3:41)
    • Pry the emergency brake cable into the front brake shoe slot with vise grip pliers
    • Lift the front brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Put the adjuster into place
    • Remove the adjuster clip
    • Put the rear brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Put white grease on both ends of the adjuster clip
    • Insert the adjuster end into place
    • Twist on the retaining spring
    • Clean the brake shoes with mineral spirits
    • Hook the springs on with the vise grip pliers
  7. Installing the New Brake Drum (5:59)
    • Try to slide the brake drum on
    • If necessary turn the adjuster wheel with a flat blade screwdriver
    • The brake rotor should slide on with some resistance
  8. Reattaching the Wheel (6:12)
    • Slide the wheel into place
    • Start the 19mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  9. Testing the Brakes (9:10)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Chisel
  • Floor Jack
  • Hammer
  • Jack Stands
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Vise Grip Pliers

  • Ratchets & Related

  • 3/8 Inch Breaker Bar
  • 3/8 Inch Drive Ratchet
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 19mm Socket

  • Torx Drivers & Sockets

  • T50 Torx Socket

How-to Video:

(09:44 min)

Tools List:

    General Tools

  • Chisel
  • Floor Jack
  • Hammer
  • Jack Stands
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Vise Grip Pliers

  • Ratchets & Related

  • 3/8 Inch Breaker Bar
  • 3/8 Inch Drive Ratchet
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 19mm Socket

  • Torx Drivers & Sockets

  • T50 Torx Socket




Vehicle Fit

  • 1992 Buick LeSabre Wheel Bearing & Hub Assembly Rear for Models with ABS Pair
  • 1993-1999 Buick LeSabre Wheel Bearing & Hub Assembly Rear Pair
  • 1991-1992 Buick Park Avenue Wheel Bearing & Hub Assembly Rear for Models with ABS Pair
  • 1993-1996 Buick Park Avenue Wheel Bearing & Hub Assembly Rear Pair
  • 1991-1993 Cadillac Deville Wheel Bearing & Hub Assembly Rear Pair
  • 1991-1993 Cadillac Fleetwood Wheel Bearing & Hub Assembly Rear Pair
  • 1992 Olds 88 Wheel Bearing & Hub Assembly Rear for Models with ABS Pair
  • 1993-1999 Olds 88 Wheel Bearing & Hub Assembly Rear Pair
  • 1991-1992 Olds 98 Wheel Bearing & Hub Assembly Rear for Models with ABS Pair
  • 1993-1996 Olds 98 Wheel Bearing & Hub Assembly Rear Pair
  • 1992 Pontiac Bonneville Wheel Bearing & Hub Assembly Rear for Models with ABS Pair
  • 1993-1999 Pontiac Bonneville Wheel Bearing & Hub Assembly Rear Pair
$101.45
Save 89%
List: $942.36 Save: $840.91
Part #: 1ASHS00036

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est