Replaces

1995-2006 Dodge Stratus Sedan Front Wheel Bearing & Hub Assembly

This part replaces:

  • HOLLANDER 538-01366, 538-01608
  • OE # 4593462
  • OE # 4578144AB
  • OE # 4593777

  • New

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either the LH (Driver Side) or RH (Passenger Side) FRONT
  • 3 Bolt Flange
  • Fits 5 Lug Wheels
  • Wheel studs included
  • Direct replacement
  • Built to strict quality control standards

This wheel bearing & hub assembly is a great replacement and has good cost savings over a unit from the dealer.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel (1:11)
    • Use a lug wrench or 19 mm socket and breaker bar to loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. Dismantle the brakes and discard the old pads and rotors. (1:36)
    • Observe your rotors and brake pads; look for signs of excess wear, uneven wear, or gouging in the pads and rotors.
    • Unbolt the caliper bolts with an 18 mm socket and ratchet.
    • Use a flat blade screwdriver and a prying motion to compress the caliper pistons enough to get the caliper off the rotor.
    • Discard the old brake pads and compress the caliper with a large c-clamp.
    • Unbolt the caliper bracket with an 18 mm socket and breaker bar.
    • Remove the rotor.
  3. Install the new pads and rotor and reassemble the brakes. (5:14)
    • Hit the new rotor with brake parts cleaner or mineral spirits to remove any grease that may cause parts of the brakes to run hot and cause uneven wear.
    • Mount the caliper bracket with your 18 mm socket and breaker bar.
    • Torque the bolts to 95 ft lbs.
    • Mount the new brake pads followed by the calipers.
    • Torque the caliper bolts to 17-18 ft lbs.
  4. Replace the wheel (8:30)
    • Mount the wheel and preliminarily tighten the lug nuts (but do not torque them just yet)
    • Lower the vehicle.
    • Use a star pattern to torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Torx Drivers & Sockets

  • T45 Torx Socket

How-to Video:

(09:27 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Torx Drivers & Sockets

  • T45 Torx Socket



This part replaces:

  • HOLLANDER 538-01366, 538-01608
  • OE # 4593462
  • OE # 4578144AB
  • OE # 4593777

Vehicle Fit

  • 1995-2000 Chrysler Cirrus Front Wheel Bearing & Hub Assembly
  • 1996-2006 Chrysler Sebring Convertible Front Wheel Bearing & Hub Assembly
  • 2001-2006 Chrysler Sebring Sedan Front Wheel Bearing & Hub Assembly
  • 1995-2006 Dodge Stratus Sedan Front Wheel Bearing & Hub Assembly
  • 1995-2000 Plymouth Breeze Front Wheel Bearing & Hub Assembly
$42.95
Save 66%
List: $125.00 Save: $82.05
Part #: 1ASHF00028

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est