Replaces

Wheel Bearing & Hub Assembly - 1ASHF00006

This part replaces:

  • HOLLANDER 538-01358R, 538-01359L
  • OE # 15997071
  • OE # 15997072

  • New

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • 3 Bolt Flange
  • Fits 6 Lug Wheel
  • Replaces dealer part numbers: 15997071, 15997072
  • Has ABS sensor
  • Studs already installed
  • Direct replacement
  • Built to strict quality control standards
  • Fits 4WD (4 Wheel Drive) Models only

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Remove wheel. (1:11)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. Step 2: Remove the calipers (1:35)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 3/8 Allen bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Compress the caliper piston with a c-clamp.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. Step 3: Install new rotor and pads (7:15)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the 3/8 Allen bolts to 25-30 ft lbs.
  4. Step 5: Put wheel back on (9:42)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 100-120 ft lbs.
    • Replace hubcap/center cap.
  5. Step 6: Test and set brakes (10:08)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:35 min)

Tools List:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket



This part replaces:

  • HOLLANDER 538-01358R, 538-01359L
  • OE # 15997071
  • OE # 15997072

Vehicle Fit

  • 1999-2000 Cadillac Escalade 4WD Front Wheel Bearing & Hub Assembly for Models with ABS
  • 1995-1999 Chevy K1500 Truck 4WD Front Wheel Bearing & Hub Assembly for Models with ABS
  • 1995 Chevy K2500 Truck 4WD Front Wheel Bearing & Hub Assembly for 6 Lug Wheels ABS
  • 1995-1999 Chevy Suburban K1500 4WD Front Wheel Bearing & Hub Assembly for Models with ABS
  • 1995-1999 Chevy Tahoe 4WD Front Wheel Bearing & Hub Assembly for Models with ABS
  • 2000 Chevy Tahoe 4WD Front Wheel Bearing & Hub Assembly for V8 5.7L Models with ABS
  • 1995-1999 GMC K1500 Truck 4WD Front Wheel Bearing & Hub Assembly for Models with ABS
  • 1995 GMC K2500 Truck 4WD Front Wheel Bearing & Hub Assembly for 6 Lug Wheels ABS
  • 1995-1999 GMC Suburban K1500 Front Wheel Bearing & Hub Assembly for Models with ABS
  • 1995-1999 GMC Yukon 4WD Front Wheel Bearing & Hub Assembly for Models with ABS
  • 2000 GMC Yukon Denali 4WD Front Wheel Bearing & Hub Assembly for V8 5.7L Models with ABS
$65.45
Save 83%
List: $388.40 Save: $322.95
Part #: 1ASHF00006

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est