Replaces

1999 Mazda B2500 Truck Wheel Bearing & Hub Assembly Front for 4WD & Rear Wheel ABS and Pulse Vacuum Hubs Pair (Timken)

Guaranteed to Fit

1999 Mazda B2500 Truck

Fit Details

  • Location: Front
  • Brake Options: Rear Wheel ABS
  • Brake Options: Pulse Vacuum Hubs
  • Quantity: Pair
  • Brands: Timken
  • Transmission/Drivetrain Type: 4WD

This part replaces:

  • TIMKEN 515026

  • New

TIMKEN HUB ASSEMBLY: 515026 (PAIR)

Specifications:

  • Brand New Timken Hub Assemblies
  • Comes as a PAIR:
    • Includes both the RH (Passenger) & LH (Driver) side FRONT
  • 3 bolt flange
  • Correct for trucks that have 4wd, 2 wheel ABS (Rear ABS Only), and with Pulse Vacuum Hubs
  • Direct replacement
  • Replaces dealer part numbers: F87A-1104BB, F87A1104BB, F87A-1104BC, F87A1104BC, F87Z-1104BB, F87Z1104BB, XL54-1104BA, XL541104BA, YS4Z-20-4CA, YS4Z204CA, ZZP1-33-061, ZZP133061
  • Fits 5 Lug Wheel
  • Studs already installed
  • Built to strict quality control standards

Note: These hubs only fit 4wd vehicles that have 2 wheel ABS and pulse vacuum hubs. To tell the difference, the pulse axle shaft will have splines on the end and the non pulse will be threaded.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto hub bearings are all tested prior to shipping.

Fit guaranteed

  • These hub bearings will install just as your originals do. You can use your existing hardware.
  • Save time and money with these direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.
    1. Jack the vehicle up and support with proper jack stands.
    2. Have a helper hold the brake pedal while you loosen the Axle Shaft Nut. This usually requires a large socket (30mm or larger) and impact wrench.
    3. Remove the brake caliper and brake rotor. Use string or a plastic tie to hang the caliper up and out of the way.
    4. Unplug ABS sensor (if applicable)
    5. Unbolt the hub flange. The hub may come free from the axle shaft easily, if not, use a gear puller or similar tool that pulls on the hub while pushing on the axle shaft. DO NOT try to drive the axle out with a hammer, this could ruin your axle CV joints.

    Reverse order to install.
    We were able to do a removal and replace on a GM car in about 45 minutes.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

 

Note: These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.


Vehicle Fit

  • 1998-1999 Ford Ranger Wheel Bearing & Hub Assembly Front for 4WD and Rear Wheel ABS Pair (Timken)
  • 2000 Ford Ranger Wheel Bearing & Hub Assembly Front for 4WD & Rear Wheel ABS and Pulse Vacuum Hubs Pair (Timken)
  • 1998 Mazda B2500 Truck Wheel Bearing & Hub Assembly Front for 4WD with Rear Wheel ABS Pair (Timken)
  • 1999-2000 Mazda B2500 Truck Wheel Bearing & Hub Assembly Front for 4WD & Rear Wheel ABS and Pulse Vacuum Hubs Pair (Timken)
  • 1998 Mazda B3000 Truck Wheel Bearing & Hub Assembly Front for 4WD with Rear Wheel ABS Pair (Timken)
  • 1999-2000 Mazda B3000 Truck Wheel Bearing & Hub Assembly Front for 4WD & Rear Wheel ABS and Pulse Vacuum Hubs Pair (Timken)
  • 1998 Mazda B4000 Truck Wheel Bearing & Hub Assembly Front for 4WD with Rear Wheel ABS Pair (Timken)
  • 1999-2000 Mazda B4000 Truck Wheel Bearing & Hub Assembly Front for 4WD & Rear Wheel ABS and Pulse Vacuum Hubs Pair (Timken)
$466.95
Save 7%
List: $504.76 Save: $37.81
Part #: TKSHS00012

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
TIMKEN
Brand #: 515026

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est