Replaces

1999-2005 Pontiac Grand Am Front Wheel Bearing & Hub Assembly Pair (Timken)

This part replaces:

  • Timken 513137

  • New

TIMKEN HUB ASSEMBLY PAIR: 513137

These replacement wheel bearing & hub assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Hub Assemblies
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Flanges (bolt to Steering Knuckles with 3 Bolts)
  • Fit 5 Lug Wheels
  • Wheel mounting studs already installed
  • Includes ABS sensors and plug wires

These replacement front hub and bearing assemblies are just what you need to get your GM mid size vehicle in good working order again! Note: For the 2004-05 Malibu Classic requiring a VIN (Vehicle Identification Number), please match the 4th digit of your VIN number to the VIN code on your title. Your vehicles VIN number can be found in the lower left corner of the windshield or on your registration.

These hub assemblies are great replacements and have good cost savings over dealer units.

Note: These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Loosening the Lug Nuts and Hub Nut ( in the video)
    • Before lifting the car, loosen the lug nuts up with a 19 mm wrench, and the hub nut using a 32-36mm socket depending on your application. It's best to do this while the car is on the ground so the wheels won't move.
  2. Step 2: Raising and Securing the Car (1:23 in the video)
    • Raise the car with either a lift or a jack and jack stands.
    • Remove the tire.
  3. Step 3: Removing the Brake Caliper (1:50 in the video)
    • Remove the two 13mm bolts-one on top and one on the bottom.
    • Grab hold of the caliper and pull off. If it's difficult, you can use the screwdriver or wrench to carefully pry it off.
    • Remove the brake rotor.
  4. Step 4: Removing the Hub (3:26 in the video)
    • There are three bolts that hold in the hub.
    • Remove those three bolts.
    • Go to the other side of the car, grab hold of the wheels and turn it.
    • If the car you're working on has ABS, disconnect the ABS sensor.
    • Reach in behind and remove the clip holding the hub.
    • For the large center bolt, use a large axle nut socket. Once the center bolt is removed, simply pull the hub off the axle shaft.
    • (If it doesn't come off, you'll need an axle puller or a gear puller. Do not use a hammer.)
  5. Step 5: Replacing the hub (9:26 in the video)
    • Once the new hub is ready, place it into position on the axle shaft.
    • Take the original bolts and reattach the hub.

Tools needed for replacement:

    Air Powered Tools

  • 3/8 Inch Air Impact Gun

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 35mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands

How-to Video:

(10:00 min)

Tools List:

    Air Powered Tools

  • 3/8 Inch Air Impact Gun

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 35mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands



This part replaces:

  • Timken 513137

Vehicle Fit

  • 2004-2005 Chevy Classic Front Wheel Bearing & Hub Assembly for Models with ABS Pair (Timken)
  • 1997-2003 Chevy Malibu Front Wheel Bearing & Hub Assembly for Models with ABS Pair (Timken)
  • 1999-2004 Olds Alero Front Wheel Bearing & Hub Assembly Pair (Timken)
  • 1997-1999 Olds Cutlass Front Wheel Bearing & Hub Assembly Pair (excluding Supreme Models) (Timken)
  • 1999-2005 Pontiac Grand Am Front Wheel Bearing & Hub Assembly Pair (Timken)
$199.95
Save 26%
List: $270.00 Save: $70.05
Only 1 left in stock
Part #: TKSHS00001

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
Timken
Brand #: 513137

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est