Replaces

1992-1996 Chevy Beretta Wheel Bearing & Hub Assembly Rear (Timken)

This part replaces:

  • Timken 512001

  • New

TIMKEN WHEEL BEARING & HUB ASSEMBLY: 512001

Specifications:

  • Brand New Timken Wheel Bearing & Hub Assembly
  • Fits either the LH (Driver Side) or RH (Passenger Side) REAR
  • Direct replacement
  • Replaces OE# 7470597
  • Has ABS sensor
  • Built to strict quality control standards

Note: This part is an authentic Timken brand product that is supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Remove wheel. (1:16 in the video)
    • While your car is still on the ground.
    • Loosen your lug nuts and jack up the car.
    • Remove the lug nuts with your socket and ratchet or lug wrench.
    • Remove the wheel and set aside.
  2. Step 2: Remove the brakes (1:25 in the video)
    • Pull the drum off.
    • Use your vice grips to pull out the springs.
    • Use a screwdriver to pry off the adjustor lever.
    • Remove the pin holding the shoes on.
    • Set aside.
  3. Step 3: Remove hub (2:57 in the video)
    • Disconnect ABS sensor if applicable.
    • Remove the T50 torx bolts using an 18mm wrench to secure the nut.
    • Separate the hub from the backing plate.
    • Clean up with a wire brush.
  4. Step 4: Replace hub (6:13 in the video)
    • Put position your new 1A Auto hub in place.
    • Secure the T50 torx bolts and nuts and tighten to 44 ft lbs.
    • Plug the ABS sensor back in.
  5. Step 5: Put brakes and wheel back on (8:20 in the video)
    • For more detailed instructions on reassembling drum brakes consult our other videos.
    • Make sure to use a star pattern when putting your wheel lugs back on.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Specialty Tools

  • Vise-Grips
  • Wire Brush

  • Torx Drivers & Sockets

  • T50 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench

How-to Video:

(09:19 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Specialty Tools

  • Vise-Grips
  • Wire Brush

  • Torx Drivers & Sockets

  • T50 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench



This part replaces:

  • Timken 512001

Vehicle Fit

  • 1991 Buick Skylark Wheel Bearing & Hub Assembly Rear for Models with ABS (Timken)
  • 1992-1996 Buick Skylark Wheel Bearing & Hub Assembly Rear (Timken)
  • 1991 Cadillac Calais Wheel Bearing & Hub Assembly Rear for Models with ABS (Timken)
  • 1992-1996 Chevy Beretta Wheel Bearing & Hub Assembly Rear (Timken)
  • 1992-2002 Chevy Cavalier Wheel Bearing & Hub Assembly Rear (Timken)
  • 2003-2005 Chevy Cavalier Wheel Bearing & Hub Assembly Rear for Models with ABS (Timken)
  • 1992-1996 Chevy Corsica Wheel Bearing & Hub Assembly Rear (Timken)
  • 1992-1998 Olds Achieva Wheel Bearing & Hub Assembly Rear (Timken)
  • 1991 Olds Calais Wheel Bearing & Hub Assembly Rear (Timken)
  • 1991 Pontiac Grand Am Wheel Bearing & Hub Assembly Rear for Models with ABS (Timken)
  • 1992-1998 Pontiac Grand Am Wheel Bearing & Hub Assembly Rear (Timken)
  • 1992-1994 Pontiac Sunbird Wheel Bearing & Hub Assembly Rear (Timken)
  • 1995-2002 Pontiac Sunfire Wheel Bearing & Hub Assembly Rear (Timken)
  • 2003-2005 Pontiac Sunfire Wheel Bearing & Hub Assembly Rear for Models with ABS (Timken)
$124.95
Part #: TKSHR00009

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
TIMKEN
Brand #: 512001

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est