Replaces

2009-2013 Chevy Impala Rear Wheel Bearing & Hub Assembly Pair

Part Details

  • Front / Rear Location: Rear
  • Quantity: Pair

  • New

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • 4 Bolt Rectangular Flanges
  • Fits 5 Lug Wheels
  • Replaces dealer part numbers: 12403095, 88964177
  • Studs already installed
  • Built to strict quality control standards
  • Fit models with ABS - RPO Code "JL9"
  • Have ABS sensors built in with correct plug configuration
  • Fit FWD (Front Wheel Drive) Models only

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

 

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:59 in the video)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Brake Pads (1:23 in the video)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pull the brake pads off
  3. Removing the Brake Rotor (2:04 in the video)
    • Remove the two 13mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Hold the rotor in place with a flat blade screwdriver
    • Remove the T30 Torx screw from the rotor
    • Strike the rotor with a hammer to loosen it
    • Pull the rotor off
  4. Removing the Wheel Hub (3:16 in the video)
    • Remove the four 10mm bolts from the wheel hub
    • Disconnect the ABS wiring harness from the hub
    • Strike the hub with a hammer to remove it
    • Push out the emergency brake cable pin with a hammer and a screwdriver
    • Pull the spring off the brake backing plate with a screwdriver
    • Pull the emergency brake cable out of the brake backing plate
  5. Separating the Wheel Hub from the Brake Backing Plate (5:01 in the video)
    • Remove the two T30 screws from the backing plate
    • Pull the bracket off of the backing plate
    • Pull the backing plate off of the hub
    • Pull the emergency brake ring off of the hub
  6. Preparing the New Wheel Hub (5:35 in the video)
    • Clean the hub mounting area with a wire brush
    • Apply white grease or bearing grease to the mounting area
    • Put the emergency brake ring onto the backing plate
    • Put the hub through the ring and backing plate, making sure the ABS wiring connector is lined up with the backing plate hole
    • Pull the arm off the emergency brake activator
    • Put the emergency brake activator onto the ring
    • Attach the bracket to the backing plate
    • Insert the two T30 screws into the bracket
    • Push the emergency brake arm into place through the bracket
  7. Installing the New Wheel Hub (7:39 in the video)
    • Attach the emergency brake cable to the emergency brake arm
    • Push the emergency brake cable into its bracket
    • Insert the pin into the bracket, using a hammer
    • Attach the spring to the emergency brake arm
    • Pull the spring onto the bracket with vise-grip pliers
    • Push the hub into place
    • Start one of the 10mm bolts to hold the hub in place
    • Start the remaining three 10mm bolts
    • Tighten the four 10mm bolts to 45 - 50 foot-pounds of torque
    • Reconnect the ABS wiring harness
    • Adjust the emergency brake, by turning the wheel with a flat blade screwdriver
  8. Reinstalling the Brake Rotor (9:43 in the video)
    • Slide the rotor on
    • Adjust the emergency brake further, if necessary
    • Insert the T30 screw into the rotor
    • Put the bracket back into place
    • Start the two 13mm bolts by hand
    • Tighten the bolts to 75 foot-pounds of torque
  9. Reinstalling the Brake Pads (10:45 in the video)
    • Apply grease to the brake pads
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten bolts to 30 foot-pounds
  10. Reattaching the Wheel (11:27 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Bearing Grease
  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 14mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Torx Drivers & Sockets

  • T30 Torx Driver

How-to Video:

(12:19 min)

Tools List:

    Materials, Fluids, and Supplies

  • Bearing Grease
  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 14mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Torx Drivers & Sockets

  • T30 Torx Driver




Vehicle Fit

  • 2005-2008 Buick Allure Rear Wheel Bearing & Hub Assembly for Models with ABS Pair
  • 2009 Buick Allure Rear Wheel Bearing & Hub Assembly Pair
  • 2005-2008 Buick LaCrosse Rear Wheel Bearing & Hub Assembly for Models with ABS Pair
  • 2009 Buick LaCrosse Rear Wheel Bearing & Hub Assembly Pair
  • 2005 Buick Terraza Rear 4 Bolt Flange Wheel Bearing & Hub Assembly Pair (excluding All Wheel Drive Models)
  • 2006-2008 Chevy Impala Rear Wheel Bearing & Hub Assembly for Models with ABS Pair
  • 2009-2013 Chevy Impala Rear Wheel Bearing & Hub Assembly Pair
  • 2006-2007 Chevy Monte Carlo Rear Wheel Bearing & Hub Assembly for Models with ABS Pair
  • 2005 Chevy Uplander Rear 4 Bolt Flange Wheel Bearing & Hub Assembly Pair (excluding All Wheel Drive Models)
  • 2004-2008 Pontiac Grand Prix Rear Wheel Bearing & Hub Assembly for Models with ABS Pair
  • 2005 Pontiac Montana SV6 Rear 4 Bolt Flange Wheel Bearing & Hub Assembly Pair (excluding All Wheel Drive Models)
  • 2005 Saturn Relay Rear 4 Bolt Flange Wheel Bearing & Hub Assembly Pair (excluding All Wheel Drive Models)
$85.45
Save 69%
List: $273.95 Save: $188.50
Part #: 1ASHS00209

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est