Replaces

1997-2000 Chevy Malibu Rear Wheel Bearing & Hub Assembly Pair

Part Details

  • Location: Rear
  • Quantity: Pair

  • New

These replacement wheel bearing & hub assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 7466992, 7467113, 7467119, 7470519, 7470520, 7470555, 7470556
  • 4 Bolt Rectangular Flange
  • Fits 5 Lug Wheel
  • Have ABS with Integral Sensors
  • Studs already installed
  • Direct replacements
  • Built to strict quality control standards
These wheel bearing & hub assemblies make great replacements and have good cost savings over dealer units.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

 

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:50 in the video)
    • Pry off the center cap by hand
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Brake Pads (1:13 in the video)
    • Remove the 12mm bolt from the brake caliper
    • Remove the 13mm bolt from the bracket
    • Pry the brake pads out with a flat blade screwdriver to push the caliper pistons in
    • Pull the caliper aside
    • Remove the brake pads
  3. Removing the Brake Rotor (2:26 in the video)
    • Remove the two 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, strike the center of the rotor with a hammer to loosen it
  4. Removing the Wheel Hub (4:23 in the video)
    • Disconnect the ABS sensor wiring harness
    • Remove the four 13mm bolts from the hub
    • Strike the hub with a hammer to loosen
    • Pull off the hub
    • Pull of the brake backing plate
    • Clean the hub mounting area with a wire brush
  5. Installing the New Wheel Hub (5:57 in the video)
    • Hold the backing plate in place with the open end facing the front of the vehicle
    • Put the hub into place with the ABS sensor connector facing the front of the vehicle
    • Start one bolt into the hub
    • Start the other three bolts
    • Tighten the three 13mm bolts into the hub to 60 foot-pounds of torque
    • Connect the ABS sensor wiring harness
  6. Installing the New Brake Rotor (7:36 in the video)
    • Slide the rotor on
    • Thread one lug nut to hold the rotor in place
    • Put the caliperbracket back into place
    • Start the two 15mm bolts by hand
    • Tighten the bolts to 60 foot-pounds of torque
  7. Installing the New Brake Pads (9:21 in the video)
    • Install the new brake pads into the caliper bracket
    • Put the caliper on
    • Thread the 12mm bolt by hand
    • Tighten the 12mm bolt to between 12 – 15 foot-pounds
    • Insert the 13mm bolt into the bracket
    • Remove the placeholder lug nut
  8. Reattaching the Wheel (10:08 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  9. Testing the Brakes (10:35 in the video)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 15mm Socket
  • 19mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Hammer
  • Jack Stands
  • Wire Brush

  • Wrenches - Metric

  • 15mm Wrench

How-to Video:

(11:09 min)

Tools List:

    Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 15mm Socket
  • 19mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Hammer
  • Jack Stands
  • Wire Brush

  • Wrenches - Metric

  • 15mm Wrench




Vehicle Fit

  • 2000-2005 Buick LeSabre Rear Wheel Bearing & Hub Assembly Pair
  • 2006-2011 Buick Lucerne Rear Wheel Bearing & Hub Assembly Pair
  • 1997-2005 Buick Park Avenue Rear Wheel Bearing & Hub Assembly Pair
  • 1991 Buick Reatta Rear Wheel Bearing & Hub Assembly Pair
  • 1991-1993 Buick Riviera Rear Wheel Bearing & Hub Assembly Pair
  • 1995-1999 Buick Riviera Rear Wheel Bearing & Hub Assembly Pair
  • 1991-1992 Cadillac Allante Rear Wheel Bearing & Hub Assembly Pair
  • 2006-2011 Cadillac DTS Rear Wheel Bearing & Hub Assembly Pair for Models with Brake Option JL9
  • 2000-2005 Cadillac Deville Rear Wheel Bearing & Hub Assembly for Models with ABS Pair
  • 1991-1992 Cadillac Eldorado Rear Wheel Bearing & Hub Assembly Pair
  • 1991-1992 Cadillac Seville Rear Wheel Bearing & Hub Assembly Pair
  • 1997-2000 Chevy Malibu Rear Wheel Bearing & Hub Assembly Pair
  • 1995-2003 Olds Aurora Rear Wheel Bearing & Hub Assembly Pair
  • 1997 Olds Cutlass Rear Wheel Bearing & Hub Assembly Pair (excluding Supreme Models)
  • 1998-1999 Olds Cutlass Rear Wheel Bearing & Hub Assembly Pair
  • 1991-1992 Olds Toronado Rear Wheel Bearing & Hub Assembly Pair
  • 2000-2005 Pontiac Bonneville Rear Wheel Bearing & Hub Assembly Pair
  • 1999-2000 Pontiac Grand Am SE Rear Wheel Bearing & Hub Assembly Pair
$85.45
Save 77%
List: $377.42 Save: $291.97
Part #: 1ASHS00134

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est