Replaces

1998-2004 Dodge Intrepid Rear Wheel Bearing & Hub Assembly Pair for Models with ABS (Timken)

Part Details

  • Location: Rear
  • Quantity: Pair
  • Brands: Timken

This part replaces:

  • TIMKEN 512029

  • New

TIMKEN WHEEL BEARING & HUB ASSEMBLIES: 512029

These replacement hub & bearing assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Wheel Bearing & Hub Assemblies
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 4582220, 4779011
  • Studs already installed
  • Fit 5 Lug Wheels
  • Direct replacements
  • Built to strict quality control standards
  • Correct for models with and without ABS (Anti-Lock Brakes)

Note: These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

 

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel
    • Loosen the Lug Nuts
    • Raise the vehicle with a jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Slide off the wheel
  2. Removing the Brakes
    • Using a pry bar, pull the brake caliper forward to reset the piston
    • Remove the 10mm sockets from the brake caliper
    • Pull off the brake caliper
    • Pull off the brake rotor
  3. Adjusting the Emergency Brake
    • If the rotor does not remove easily, adjust the emergency brakes
    • Remove the rubber plug in the back with a flat blade screwdriver
    • Use a brake spoon to turn the adjuster wheel down
  4. Removing the Hub
    • Using a hammer and chisel, remove the dust cover
    • Break the cotter pin with the slip joint pliers
    • Use a 36mm socket with a breaker bar and a pipe to loosen the nut
    • Remove the nut
    • Pull off the hub
  5. Installing the New Hub
    • Remove rust with paper towel or wire brush
    • Apply lubricant if necessary
    • Slide on the new hub
    • Secure the hub in place with a block of wood and a hammer
    • Reattach the nut and tighten it with the breaker bar
    • Tighten the nut to 124 foot-pounds with the torque wrench
    • Attach the spring washer and insert the cotter pin
    • Secure the cotter pin using the pliers
    • Reattach the dust cover using the hammer
  6. Reinstalling the Brake Rotor
    • Slide on the brake rotor
    • Use the brake spoon to adjust the emergency brake
    • There should be even friction all around from the emergency brake shoes
    • Replace the rubber plug
  7. Reinstalling the Brake Caliper and Pads
    • Reattach the pads to the caliper
    • Push back the caliper slides
    • Put the caliper into place
    • Slide in the 10mm bolts from behind
    • Begin threading the bolts by hand
    • Tighten the bolts with the 10mm socket
    • Tighten the bolts to 20 foot-pounds with the torque wrench
  8. Reinstalling the Wheel
    • Slide the wheel on
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle
    • Torque the lug nuts to between 90 and 100 foot-pounds
  9. Testing the Brakes
    • Pump the brakes repeatedly
    • Press the brake pedal
    • Put the vehicle into gear
    • Make sure the brakes hold the vehicle in gear
    • Test the brakes at5 miles per hour
    • Test the brakes at10 miles per hour
    • Road test the vehicle

How-to Video:

(12:08 min)

Tools List:

    Materials, Fluids, and Supplies

  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Slip-Joint Pliers

  • Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket
  • 36mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Block of Wood
  • Brake Spoon
  • Chisel
  • Floor Jack
  • Hammer
  • Jack Stands
  • Wire Brush



This part replaces:

  • TIMKEN 512029

Vehicle Fit

  • 1999-2004 Chrysler 300M Rear Wheel Bearing & Hub Assembly Pair for Models with ABS (Timken)
  • 1993-1996 Chrysler Concorde Rear Wheel Bearing & Hub Assembly Pair for Models with ABS (Timken)
  • 1997 Chrysler Concorde Rear Wheel Bearing & Hub Assembly Pair for Models with ABS & Disc Brakes (Timken)
  • 1998-2004 Chrysler Concorde Rear Wheel Bearing & Hub Assembly Pair for Models with ABS (Timken)
  • 1994-1997 Chrysler LHS Rear Wheel Bearing & Hub Assembly Pair for Models with ABS (Timken)
  • 1999-2001 Chrysler LHS Rear Wheel Bearing & Hub Assembly Pair for Models with ABS (Timken)
  • 1994-1996 Chrysler New Yorker Rear Wheel Bearing & Hub Assembly Pair for Models with ABS (Timken)
  • 1993-1997 Dodge Intrepid Rear Wheel Bearing & Hub Assembly Pair for Models with ABS & Disc Brakes (Timken)
  • 1998-2004 Dodge Intrepid Rear Wheel Bearing & Hub Assembly Pair for Models with ABS (Timken)
  • 1993-1996 Eagle Vision Rear Wheel Bearing & Hub Assembly Pair for Models with ABS (Timken)
  • 1997 Eagle Vision Rear Wheel Bearing & Hub Assembly Pair for Models with ABS & Disc Brakes (Timken)
$114.95
Save 18%
List: $140.18 Save: $25.23
Part #: TKSHS00441

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
TIMKEN
Brand #: 512029

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est