2008-2009 Ford Taurus Wheel Bearing & Hub Assembly Rear 4WD (Motorcraft)

Part Details

  • Location: Rear
  • Brands: Motorcraft
  • Transmission/Drivetrain Type: 4WD

This part replaces:


  • New

Ford/Motorcraft: HUB37

This wheel bearing and hub assembly is a FORD original equipment part! It is the same part that you would receive if you purchased it from your local Ford dealer!


  • Brand NEW Ford/Motorcraft part
  • Fits LH (Driver) or RH (Passenger) Side REAR
  • Direct replacement
  • Replaces dealer part numbers: 8F932C299AA, 8F93 2C299 AA, 8F9Z1104A, 8F9Z 1104 A
  • 4 Bolt Flange
  • Fits 5 Lug Wheel
  • Studs already installed
  • Built to strict quality control standards
  • Correct for 4WD Models


  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto hub bearings are all tested prior to shipping.

Fit guaranteed

  • This hub bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.
    1. Jack the vehicle up and support with proper jack stands.
    2. Have a helper hold the brake pedal while you loosen the Axle Shaft Nut. This usually requires a large socket (30mm or larger) and impact wrench.
    3. Remove the brake caliper and brake rotor. Use string or a plastic tie to hang the caliper up and out of the way.
    4. Unplug ABS sensor (if applicable)
    5. Unbolt the hub flange. The hub may come free from the axle shaft easily, if not, use a gear puller or similar tool that pulls on the hub while pushing on the axle shaft. DO NOT try to drive the axle out with a hammer, this could ruin your axle CV joints.

    Reverse order to install.
    We were able to do a removal and replace on a GM car in about 45 minutes.


  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

2 Year Warranty

This item is backed by a 2 Year  Manufacturers Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Vehicle Fit

  • 2005-2007 Ford Five Hundred Wheel Bearing & Hub Assembly Rear 4WD (Motorcraft)
  • 2005-2007 Ford Freestyle Wheel Bearing & Hub Assembly Rear 4WD (Motorcraft)
  • 2008-2009 Ford Taurus Wheel Bearing & Hub Assembly Rear 4WD (Motorcraft)
  • 2008-2009 Ford Taurus X Wheel Bearing & Hub Assembly Rear 4WD (Motorcraft)
  • 2005-2007 Mercury Montego Wheel Bearing & Hub Assembly Rear 4WD (Motorcraft)
  • 2008-2009 Mercury Sable Wheel Bearing & Hub Assembly Rear 4WD (Motorcraft)
Part #: MCSHR00002

- Ships Same Day for orders placed by 5 P.M. ET


Check Shipping Rates
Brand #: HUB37

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!


hablamos Español:866-401-3393
For Orders Placed By 5pm Est