Replaces

1992-1996 Chevy Beretta Front & Rear Wheel Bearing & Hub Assembly (Set of 4)

Part Details

  • Location: Front
  • Location: Rear
  • Quantity: Set of 4

  • New

These replacement wheel bearing & hub assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Replaces dealer part numbers: 7470014, 7470597
  • Direct replacements
  • Built to strict quality control standards
These wheel bearing & hub assemblies are great replacements and have good cost savings over units from the dealer.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

 

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Remove wheel.
    • While your car is still on the ground.
    • Loosen your lug nuts and jack up the car.
    • Remove the lug nuts with your socket and ratchet or lug wrench.
    • Remove the wheel and set aside.
  2. Step 2: Remove the brakes
    • Pull the drum off.
    • Use your vice grips to pull out the springs.
    • Use a screwdriver to pry off the adjustor lever.
    • Remove the pin holding the shoes on.
    • Set aside.
  3. Step 3: Remove hub
    • Disconnect ABS sensor if applicable.
    • Remove the T50 torx bolts using an 18mm wrench to secure the nut.
    • Separate the hub from the backing plate.
    • Clean up with a wire brush.
  4. Step 4: Replace hub
    • Put position your new 1A Auto hub in place.
    • Secure the T50 torx bolts and nuts and tighten to 44 ft lbs.
    • Plug the ABS sensor back in.
  5. Step 5: Put brakes and wheel back on
    • For more detailed instructions on reassembling drum brakes consult our other videos.
    • Make sure to use a star pattern when putting your wheel lugs back on.

How-to Video:

(09:19 min)

Tools List:

    Materials, Fluids, and Supplies

  • Penetrating Oil

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Specialty Tools

  • Vise-Grips
  • Wire Brush

  • Torx Drivers & Sockets

  • T50 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench




Vehicle Fit

  • 1991 Buick Skylark Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS
  • 1992-1998 Buick Skylark Front & Rear Wheel Bearing & Hub Assembly (Set of 4)
  • 1992-1996 Chevy Beretta Front & Rear Wheel Bearing & Hub Assembly (Set of 4)
  • 1992-2002 Chevy Cavalier Front & Rear Wheel Bearing & Hub Assembly (Set of 4)
  • 2003-2005 Chevy Cavalier Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS
  • 1992-1996 Chevy Corsica Front & Rear Wheel Bearing & Hub Assembly (Set of 4)
  • 1992-1998 Olds Achieva Front & Rear Wheel Bearing & Hub Assembly (Set of 4)
  • 1991 Olds Calais Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS
  • 1991 Pontiac Grand Am Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS
  • 1992-1998 Pontiac Grand Am Front & Rear Wheel Bearing & Hub Assembly (Set of 4)
  • 1992-1994 Pontiac Sunbird Front & Rear Wheel Bearing & Hub Assembly (Set of 4)
  • 1995-2002 Pontiac Sunfire Front & Rear Wheel Bearing & Hub Assembly (Set of 4)
  • 2003-2005 Pontiac Sunfire Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS
$120.45
Save 87%
List: $959.56 Save: $839.11
Part #: 1ASHS00614

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est