Replaces

2002-2005 Ford Explorer 4 Door Front Wheel Bearing & Hub Assembly (excluding Sport Trac Models) Pair

Part Details

  • Quantity: Pair

This part replaces:

  • Hollander 538-01585
  • Hollander 538-01616
  • OE # 1L241104AC
  • OE # 1L241104AD
  • OE # 1L241104AE
  • OE # 1L241104AF
  • OE # 1L241104AG
  • OE # 1L241K018AB
  • OE # 1L2Z1104AA
  • OE # 1L2Z1104AB
  • OE # 2L241104AA
  • OE # 2L241K018AB
  • OE # 2L2Z1104AA
  • OE # 2L2Z1104AB
  • OE # 3C5Z1104AA
  • OE # 3L241K018AA
  • OE # 3L241K018AB
  • OE # 3L2Z1104AB
  • OE # 4L241K018AA
  • OE # 4L2Z1104AA

  • New

Specifications:

  • Comes as a Pair
    • Fits the LH (Driver Side) & RH (Passenger Side)
  • 3 Bolt Flanges
  • Fit 5 Lug Wheels
  • Studs already installed
  • Include ABS sensors and plug wires
  • Direct replacements
  • Built to strict quality control standards

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:48)
    • Pry off the center cap with a flat blade screwdriver
    • Remove the hub nut with a 30mm socket and ratchet
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Brake Pads (1:33)
    • Pry the ABS sensor wiring out of its clips with a flat blade screwdriver
    • Remove the two 14mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Hold the brake caliper aside with wire ties
    • Pry the brake pads off with a flat blade screwdriver
  3. Removing the Brake Rotor (3:19)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  4. Removing the Hub (3:40)
    • Disconnect the ABS sensor wiring harness in the engine compartment
    • Unclip the ABS sensor wiring
    • Pull out the ABS sensor wire
    • Make sure the axle can move freely in and out of the hub
    • Apply rust penetrant to the hub bolts
    • Remove the three 15mm bolts from the hub
    • Pull off the hub
  5. Installing the Hub (5:37)
    • Push the hub onto the axle with the ABS sensor on top
    • Insert the three 15mm bolts into the hub
    • Tighten the hub bolts to 75 foot-pounds of torque
    • Feed the ABS sensor wire into place
    • Fasten the hub nut onto the hub
  6. Installing the Brake Rotor (7:40)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the two 18mm bolts by hand
    • Tighten the bolts to 85 foot-pounds
  7. Installing the Brake Pads (8:27)
    • Apply brake grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Remove the wire ties from the caliper
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten bolts to 25 foot-pounds
    • Push the ABS sensor wire into its clips
    • Clean the brake rotor
  8. Reattaching the Wheel (10:04)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut to 180 foot-pounds
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  9. Connecting the ABS Sensor (10:50)
    • Connect the ABS sensor wiring harness inside the engine compartment
  10. Testing the Brakes (11:03)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • White Grease

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 30mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 8 answers
Does these fit the 2 wheel drive version of the mountaineer?
Curtis C on Mar 13, 2016
BEST ANSWER: I used these hubs on a 2005 Lincoln Aviator and they worked fine with no issues. I suggest you cross reference the Ford part number to the 1A1 listed replacement part numbers to make sure you order the right part. You can go to a Ford parts website and get the hub part # then cross reference it to 1A1. Good luck , either go on line for a video on how to remove the hub assemblies, look at a few they are very helpful, plus make sure you have the right tools for removal and installation.
Do the new bearings come already pressed into the new hub assembly?
William H on Mar 10, 2016
BEST ANSWER: Yes, all i had to to was bolt it on. Too easy.

How-to Video:

(11:32 min)

Tools List:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • White Grease

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 30mm Socket



This part replaces:

  • Hollander 538-01585
  • Hollander 538-01616
  • OE # 1L241104AC
  • OE # 1L241104AD
  • OE # 1L241104AE
  • OE # 1L241104AF
  • OE # 1L241104AG
  • OE # 1L241K018AB
  • OE # 1L2Z1104AA
  • OE # 1L2Z1104AB
  • OE # 2L241104AA
  • OE # 2L241K018AB
  • OE # 2L2Z1104AA
  • OE # 2L2Z1104AB
  • OE # 3C5Z1104AA
  • OE # 3L241K018AA
  • OE # 3L241K018AB
  • OE # 3L2Z1104AB
  • OE # 4L241K018AA
  • OE # 4L2Z1104AA

Vehicle Fit

  • 2002-2005 Ford Explorer 4 Door Front Wheel Bearing & Hub Assembly (excluding Sport Trac Models) Pair
  • 2003-2005 Lincoln Aviator Front Wheel Bearing & Hub Assembly Pair
  • 2002-2005 Mercury Mountaineer Front Wheel Bearing & Hub Assembly Pair
$ 126.95
Save 58%
List: $300.00 Save: $173.05
Part #: 1ASHS00078

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est