Replaces

2003-2004 Buick Century Wheel Bearing & Hub Assembly Front (excluding ABS Brakes) Pair

Part Details

  • Front / Rear Location: Front

  • New

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 bolt flanges
  • Direct replacements
  • Replaces dealer part numbers: 7467558, 12413005, 12413006, 12413139
  • Fit 5 lug wheel
  • Wheel studs already installed
  • Correct for vehicles WITHOUT front wheel ABS

 

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:43 in the video)
    • Loosen the lug nut covers with a 19mm socket
    • Loosen the hub nut with a 35mm socket and a pipe for leverage
    • Leave the hub nut on for a few threads
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Brake Caliper and Rotor (1:45 in the video)
    • Remove the hub nut
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the 15mm bolts from the brake caliper
    • Pull the caliper up and off
    • Remove the 15mm bolts from the caliper bracket
    • Remove the caliper bracket
    • Remove the rotor
  3. Removing the Hub (2:41 in the video)
    • Remove the three 13mm bolts on the back of the hub
    • Hammer on the side of the hub
    • Pull the hub off
  4. Installing the New Hub (3:30 in the video)
    • Put a 13mm bolt on the hub bracket
    • Insert the hub into place
    • Insert and tighten the 13mm bolts to the hub
    • Torque the 13mm bolts to 65 ft/lbs
  5. Installing the Rotor and Brake Caliper (4:28 in the video)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the 15mm bolts by hand and tighten them
    • Tighten the bolts to 85 ft/lbs of torque
    • Install the new brake pads into the bracket
    • Apply grease to the brake pad tabs
    • Insert the brake pad slides
    • Put the caliper on
    • Tighten the bolts to 75 foot-pounds
    • Replace the hub nut cap preliminarily
  6. Reattaching the Wheel (6:37 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut
    • Torque the hub nut to 159 ft/lbs
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  7. Testing the Brakes (7:35 in the video)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Brake Fluid

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 19mm Socket
  • 35mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Hammer
  • Jack Stands

How-to Video:

(08:03 min)

Tools List:

    Materials, Fluids, and Supplies

  • Brake Fluid

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 19mm Socket
  • 35mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Hammer
  • Jack Stands




Vehicle Fit

  • 2003-2004 Buick Century Wheel Bearing & Hub Assembly Front (excluding ABS Brakes) Pair
  • 2002-2004 Buick Regal Wheel Bearing & Hub Assembly Front (excluding ABS Brakes) Pair
  • 2003-2005 Buick Rendezvous Wheel Bearing & Hub Assembly Front (excluding ABS Brakes) Pair
  • 2000-2005 Chevy Impala Wheel Bearing & Hub Assembly Front (excluding ABS Brakes) Pair
  • 2000-2005 Chevy Monte Carlo Wheel Bearing & Hub Assembly Front (excluding ABS Brakes) Pair
  • 2003-2005 Chevy Venture Wheel Bearing & Hub Assembly Front (excluding ABS Brakes) (excluding All Wheel Drive Models) Pair
  • 2003-2005 Pontiac Aztek Wheel Bearing & Hub Assembly Front (excluding ABS Brakes) Pair
  • 2003 Pontiac Grand Prix Wheel Bearing & Hub Assembly Front (excluding ABS Brakes) Pair
  • 2003-2004 Pontiac Montana Wheel Bearing & Hub Assembly Front (excluding ABS Brakes) (excluding All Wheel Drive Models) Pair
  • 2005 Pontiac Montana Wheel Bearing & Hub Assembly Front (excluding ABS Brakes) Pair
$90.45
Save 79%
List: $431.96 Save: $341.51
Part #: 1ASHS00081

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est