Replaces

2004 Chevy Trailblazer Front Wheel Bearing & Hub Assembly

Guaranteed to Fit

2004 Chevy Trailblazer

Part Details

  • Front / Rear Location: Front

This part replaces:

  • OE # 12413037, 15130858
  • HOLLANDER 538-01587

  • New

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Includes 6 lug nut studs already installed, ABS Sensor, and ABS Sensor wire harness
  • 3 Bolt Flange
  • Direct replacement
  • Built to strict quality control standards
  • Fits both 2WD & 4WD Models

This wheel bearing & hub assembly is a great replacement and has good cost savings over a unit from the dealer.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Remove the wheel and tire (1:18 in the video)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. Step 2: Remove Caliper (2:07 in the video)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 13mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your 18mm socket to remove the brackets.
  3. Step 3: Remove brake disk (4:13 in the video)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. Step 4: Remove Hub (4:42 in the video)
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Remove the 3 bolts securing the hub using your 18mm socket and extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Disconnect your ABS sensor.
    • Use a rubber mallet to break your hub free, and work around the flange with the hammer to pull it off.
    • Remove the hub and shield.
    • Clean up any corrosion with a wire brush.
  5. Step 5: Install new hub (9:10 in the video)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18 mm bolts in place and tighten the nuts to 90 ft lbs.
    • Reinstall the ABS harness.
    • Tighten but don't torque the lug nut.
  6. Step 6: Put brakes and wheel back on (11:50 in the video)
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 100-120 ft lbs
    • Hub nut is 103 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to pump the brakes and seat your rotors.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant
  • Wire Ties

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket
  • 35mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Rubber Mallet
  • Wire Brush

How-to Video:

(13:45 min)

Tools List:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant
  • Wire Ties

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket
  • 35mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Rubber Mallet
  • Wire Brush



This part replaces:

  • OE # 12413037, 15130858
  • HOLLANDER 538-01587

Vehicle Fit

  • 2004-2007 Buick Rainier Front Wheel Bearing & Hub Assembly
  • 2003-2006 Chevy SSR Front Wheel Bearing & Hub Assembly
  • 2002-2009 Chevy Trailblazer Front Wheel Bearing & Hub Assembly
  • 2002-2006 Chevy Trailblazer EXT Front Wheel Bearing & Hub Assembly
  • 2002-2009 GMC Envoy Front Wheel Bearing & Hub Assembly
  • 2002-2006 GMC Envoy XL Front Wheel Bearing & Hub Assembly
  • 2004-2005 GMC Envoy XUV Front Wheel Bearing & Hub Assembly
  • 2003-2008 Isuzu Ascender Front Wheel Bearing & Hub Assembly
  • 2002-2004 Olds Bravada Front Wheel Bearing & Hub Assembly
  • 2005-2009 Saab 9-7X Front Wheel Bearing & Hub Assembly
$65.45
Save 81%
List: $338.92 Save: $273.47
Part #: 1ASHF00039

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est