Replaces

2005 Cadillac Escalade ESV AWD Front Wheel Bearing & Hub Assembly

Guaranteed to Fit

2005 Cadillac Escalade ESV

Part Details

  • Front / Rear Location: Front

This part replaces:

  • HOLLANDER 538-01481
  • OE # 15112382
  • OE # 15134584
  • OE # 15102294

  • New

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Has ABS sensor
  • 3 Bolt Flange
  • Fits 6 Lug Wheels
  • Wheel studs already installed
  • Direct replacement
  • Built to strict quality control standards
  • Fits 4WD (4 Wheel Drive) or AWD (All Wheel Drive) Models only

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Air Ride Compressor (0:44)
    • Remove the spare wheel
    • Pull the hose off of the air ride compressor
    • Reset the hose clip
    • Loosen the three 12mm nuts from the compressor
    • Lift the air compressor up and out
    • Disconnect the compressor wiring harness
    • Disconnect the second compressor hose at the chassis
  2. Removing the Motor from the Compressor (2:27)
    • Pull the clips out of the compressor cover with a pair of pliers
    • Remove the three T25 Torx bolts from the compressor
    • Pull the motor off of the compressor
  3. Preparing the New Motor (3:31)
    • Disconnect the hose from the old motor
    • Push the hose onto the motor
    • Pry the wiring harness from the old motor
    • Remove the Phillips screw from the old motor
    • Remove the wire ties from the wiring harness
    • Pull back the wiring covers
    • Clip the wires with wire cutters
    • Match the wires to the corresponding, color-coded ones on the new motor
    • Clip each wire
    • Strip the end of each wire
    • Push the wires into the splices
    • Crimp the splices with pliers
    • Put the compressor in a vice
    • Twist the drier off of the compressor
    • Remove the three T25 screws from the old motor bracket
  4. Preparing the new Drier (7:32)
    • Note that there is a spring inside the drier
    • Carefully twist off the lid of the drier
    • Pull the spring out of the drier
    • Pull the gasket out of the drier
    • Pull the screen out of the drier
    • Pull the pad out of the drier
    • Remove the beads from the drier
    • Pull the second pad out of the drier
    • Pull the second screen out of the drier
    • Insert the new screen into the drier
    • Insert the new pad into the drier
    • Pour the new beads into the drier
    • Insert the second new pad into the drier
    • Insert the second new screen into the drier
    • Put the new spring in place
    • Put a new gasket on the drier lid
    • Twist on the drier lid
  5. Reconstructing the Compressor (9:10)
    • Put a new O-ring onto the drier end
    • Twist the drier onto the compressor
    • Loosen the 8mm bolt from the compressor
    • Insert the wire from the old compressor
    • Tighten the 8mm bolt
    • Reconnect the wiring harness to the drier
    • Push the pads into the bracket
    • Put the compressor onto the bracket
    • Insert the three T25 screws to attach the new motor to the bracket
    • Seat the wiring harness in the bracket
  6. Reinstalling the Compressor (10:41)
    • Connect the compressor wiring harness
    • Hang the compressor in place by its bolts
    • Tighten the 12mm nuts onto the compressor bracket
    • Push the compressor hoses back into place

Tools needed for replacement:

    General Tools

  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Wire Cutters
  • Wire End Cutters

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 8mm Socket

  • Specialty Tools

  • Vise-Grips

  • Torx Drivers & Sockets

  • T25 Torx Driver

How-to Video:

(11:49 min)

Tools List:

    General Tools

  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Wire Cutters
  • Wire End Cutters

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 8mm Socket

  • Specialty Tools

  • Vise-Grips

  • Torx Drivers & Sockets

  • T25 Torx Driver



This part replaces:

  • HOLLANDER 538-01481
  • OE # 15112382
  • OE # 15134584
  • OE # 15102294

Vehicle Fit

  • 2002-2006 Cadillac Escalade AWD Front Wheel Bearing & Hub Assembly
  • 2003-2006 Cadillac Escalade ESV AWD Front Wheel Bearing & Hub Assembly
  • 2002-2006 Cadillac Escalade EXT AWD Front Wheel Bearing & Hub Assembly
  • 2002-2006 Chevy Avalanche 1500 4WD Front Wheel Bearing & Hub Assembly
  • 2003-2008 Chevy Express 1500 Van 4WD Front Wheel Bearing & Hub Assembly
  • 2003-2005 Chevy Express 2500 Van 4WD Front Wheel Bearing & Hub Assembly
  • 1999-2000 Chevy Silverado 1500 4WD Front Wheel Bearing & Hub Assembly
  • 2001-2003 Chevy Silverado 1500 4WD Front Wheel Bearing & Hub Assembly
  • 2004-2006 Chevy Silverado 1500 4WD Front Wheel Bearing & Hub Assembly for 6 Lug Wheels
  • 2007 Chevy Silverado 1500 4WD Front Wheel Bearing & Hub Assembly for 6 Lug Wheels for Classic Models
  • 2000-2006 Chevy Suburban 1500 4WD Front Wheel Bearing & Hub Assembly
  • 2000 Chevy Tahoe 4WD Front Wheel Bearing & Hub Assembly (excluding V8 5.7L)
  • 2001-2006 Chevy Tahoe 4WD Front Wheel Bearing & Hub Assembly
  • 2003-2008 GMC Savana 1500 Van 4WD Front Wheel Bearing & Hub Assembly
  • 2003-2005 GMC Savana 2500 Van 4WD Front Wheel Bearing & Hub Assembly
  • 1999-2000 GMC Sierra 1500 4WD Front Wheel Bearing & Hub Assembly
  • 2001-2003 GMC Sierra 1500 4WD Front Wheel Bearing & Hub Assembly
  • 2004-2006 GMC Sierra 1500 4WD Front Wheel Bearing & Hub Assembly for 6 Lug Wheels
  • 2007 GMC Sierra 1500 4WD Front Wheel Bearing & Hub Assembly for 6 Lug Wheels for Classic Models
  • 2002-2006 GMC Sierra Denali 1500 4WD Front Wheel Bearing & Hub Assembly
  • 2007 GMC Sierra Denali 1500 4WD Front Wheel Bearing & Hub Assembly for Classic Models
  • 2000 GMC Yukon 4WD Front Wheel Bearing & Hub Assembly (excluding Denali Models)
  • 2001-2006 GMC Yukon 4WD Front Wheel Bearing & Hub Assembly
  • 2000-2006 GMC Yukon XL 1500 4WD Front Wheel Bearing & Hub Assembly
$65.45
Save 80%
List: $321.26 Save: $255.81
Part #: 1ASHF00005

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est