Replaces

2007-2009 Saturn Aura Front Wheel Bearing & Hub Assembly (Timken)

Part Details

  • Location: Front
  • Brands: Timken

This part replaces:

  • OE # 15793213
  • Timken HA590070
  • HOLLANDER 538-01660

  • New

TIMKEN WHEEL BEARING & HUB ASSEMBLY: HA590070

This replacement hub & bearing assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Wheel Bearing & Hub Assembly
  • Fits LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 15793213, 12413083, 12413084, 12413166, 12413274, 21995732, 22706967, 7467651, 7467687
  • Fits 5 Lug Wheels
  • Direct replacement
  • Built to strict quality control standards

Note: This part is an authentic Timken brand product that is supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Removing the Wheel (0:54 in the video)
    • Use a 19mm socket to remove the plastic covers.
    • Remove the wheel cover.
    • Loosen the all the lug nuts while wheel is on the ground.
    • Once the car is jacked up remove all the lug nuts and pull the wheel free.
  2. Step 2: Removing the Brakes (1:37 in the video)
    • Remove the two 14mm bolts on the back of the caliper
    • Place a screwdriver into the whole on the caliper and pry the pads out.
    • Remove the caliper and pads.
    • Remove the two 15mm bolts on the caliper bracket.
    • Pull the bracket free.
    • Pull rotor off.
    • Pull the tab on the ABS harness and pull the harness free.
  3. Step 3:Removing the Rotor and Hub (4:01 in the video)
    • Hit the axel with a hammer. If it moves you are all set. If it doesn't you need an axel puller.
    • Remove the three screws on the back of the hub. Use a pipe for extra leverage.
    • Hammer the hub from side to side, up and down, until it loosens and can be pulled free.
    • Remove the hub and backing plate.
    • Use a wire brush to clean the bracket.
    • Spray with penetrating oil.
  4. Step 4: Replacing the Hub Assembly (7:09 in the video)
    • Replace the backing plate.
    • Run the connecter up and through.
    • Line up the hub and push into place. Put the bolts through.
    • Reconnect the ABS.
    • Tighten the three hub bolts to 65ft/lbs.
    • Slide on the rotor. And replace one nut to secure it.
    • Replace the caliper bracket and bolts. Tighten to 85ft/lbs.
    • Put the brake pads into place.
    • Replace the caliper and the two bolts to secure it. Tighten to 35ft/lbs.
    • Remove the nut from the rotor.
  5. Step 5: Replace the Wheel (11:11 in the video)
    • Put the wheel into place.
    • Replace the lug nuts.
    • Lower the vehicle.
    • Tighten the lug nuts in a star pattern to 100ft/lbs.
    • Tighten the center lug nut to 159ft/lbs.
    • Replace the wheel cover.
    • Use a socket to replace the retainers.
    • Pump your brakes until they are firm.

Tools needed for replacement:

    Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 14mm Socket
  • 15mm Socket
  • 19mm Socket
  • 35mm Socket

  • Specialty Tools

  • Hammer
  • Jack Stands
  • Wire Brush

How-to Video:

(12:29 min)

Tools List:

    Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 14mm Socket
  • 15mm Socket
  • 19mm Socket
  • 35mm Socket

  • Specialty Tools

  • Hammer
  • Jack Stands
  • Wire Brush



This part replaces:

  • OE # 15793213
  • Timken HA590070
  • HOLLANDER 538-01660

Vehicle Fit

  • 2008-2010 Chevy Cobalt SS Front Wheel Bearing & Hub Assembly for Models with 5 Lug Wheels (Timken)
  • 2008-2010 Chevy HHR SS Front Wheel Bearing & Hub Assembly for Models with Rear Disc Brakes (Timken)
  • 2004-2005 Chevy Malibu Front Wheel Bearing & Hub Assembly New Body Style with with ABS (4th Vin Digit Z) (Timken)
  • 2006-2007 Chevy Malibu Front Wheel Bearing & Hub Assembly for Models with ABS (Timken)
  • 2008-2012 Chevy Malibu Front Wheel Bearing & Hub Assembly (Timken)
  • 2008-2010 Chevy Malibu Hybrid Front Wheel Bearing & Hub Assembly (Timken)
  • 2004-2007 Chevy Malibu Maxx Front Wheel Bearing & Hub Assembly (Timken)
  • 2005-2007 Pontiac G6 Front Wheel Bearing & Hub Assembly for Models with ABS (Timken)
  • 2008-2010 Pontiac G6 Front Wheel Bearing & Hub Assembly (Timken)
  • 2007-2009 Saturn Aura Front Wheel Bearing & Hub Assembly (Timken)
$150.45
Save 51%
List: $304.24 Save: $153.79
Part #: TKSHF00185

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
Timken
Brand #: HA590070

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est