Replaces

2000-2000 Cadillac Deville Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS 4 Wheel Disc Brakes Brake Option JL9

Part Details

  • Front / Rear Location: Front
  • Front / Rear Location: Rear
  • Quantity: Set of 4

  • New

These replacement wheel hub & bearing assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Replaces dealer part numbers: 7470017, 7470105, 7470143, 7470555, 7470567, 7470568, 12429204
  • Wheel studs already included and installed!
  • Have ABS sensors w/stainless steel sensor wire clips
  • Direct replacements
  • Built to strict quality control standards

It is very important when installing to tighten the Front Hub Nut to 118 foot lbs. Failure to use the correct torque specifications will result in premature failure of the hub.

NOTE: For 2001 Models: Replaces hub assemblies with Stainless Steel Sensor Wire Clips. Do not replace hub assemblies with Plastic Clips.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

 

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel and tire (1:30 in the video)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. Remove Caliper (2:00 in the video)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 15mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
  3. Remove brake disk (2:44 in the video)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. Remove Hub (2:56 in the video)
    • Remove the 3 bolts securing the hub using your 13mm socket and 3/8 extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a rubber mallet to break it free, and work around the flange with the hammer to pull it off.
    • Leave the top 13mm loosely still in to prevent the hub from flying out if you hit it too hard.
    • Remove the hub, using driving tools to help work it out of the steering knuckle.
    • Clean up any corrosion with a wire brush.
  5. Install new hub (8:30 in the video)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Watch part 2 to install your new 1A Auto hub!

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

How-to Video:

(09:37 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet




Vehicle Fit

  • 2000-2005 Buick LeSabre Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS
  • 1997-2005 Buick Park Avenue Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS
  • 1997-1999 Buick Riviera Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS
  • 2000 Cadillac Deville Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS 4 Wheel Disc Brakes Brake Option JL9
  • 2001-2005 Cadillac Deville Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS 4 Wheel Disc Brakes Brake Option JL9
  • 1997-1999 Olds Aurora Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS
  • 2001-2003 Olds Aurora Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS
  • 2000-2005 Pontiac Bonneville Front & Rear Wheel Bearing & Hub Assembly (Set of 4) for Models with ABS
$135.45
Save 90%
List: $1,401.76 Save: $1,266.31
Part #: 1ASHS00619

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est