Replaces

2003-2007 Hummer H2 4WD Front Wheel Bearing & Hub Assembly Pair

Part Details

  • Location: Front
  • Quantity: Pair

  • New

Specifications:

  • Come as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • 4 bolt flanges
  • Includes ABS sensors and plug wires
  • Direct replacements
  • Replaces dealer part numbers: 15042868, 15104582, 15112411, 15719015, 89059059
  • Fits 8 Lug Wheels
  • Studs already installed
  • Built to strict quality control standards
  • Fits 4WD (Four Wheel Drive) Models only

NOTE: For 2007 model fits: Fits 2007 Classic body style models only. Does NOT fit New body style models.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

 

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:52 in the video)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Caliper Bracket (1:17 in the video)
    • Remove the T55 Torx bolts from the caliper
    • Use either a C-clamp to squeeze the caliper to push the caliper piston in
    • Remove the caliper
    • Pry the brake pads off with a flat blade screwdriver
    • Use a piece of pipe and ratchet to remove two 18mm bolts from the caliper bracket
    • Slide the rotor off
  3. Removing the Hub (2:58 in the video)
    • Disconnect the ABS harness from the frame and steering spindle by removing the clips
    • Pry off the center hub cap using a flat blade screw driver and hammer
    • Remove the center hub nut with an impact wrench and air blow gun
    • Remove the three 15mm hub bolts with two 15mm wrenches
    • Twist the hub nut a quarter of the way
    • And hammer from the back of the hub
    • Remove the hub nut and pull the hub out
  4. Installing the New Hub (5:06 in the video)
    • Place the backing plate onto the hub
    • Push the hub back into place
    • Insert and tighten the 15mm hub bolts
    • Torque the 15mm hub bolts to 75 ft/lbs
    • Remove the clip and feed the ABS harness back into place
    • Replace the clips and brackets to the ABS harness
    • Replace center hub nut and washer
    • Tighten the center hub nut
  5. Replacing the Caliper Bracket (6:46 in the video)
    • Place the rotor on the hub
    • Twist a lug nut to hold the rotor in place
    • Put the caliper on
    • Replace and tighten the 18mm bolts
    • Torque the 18mm bolts to 75 ft/lbs
    • Install the new brake pads into the bracket, tapping lightly with a hammer
    • Grease the caliper bolts
    • Place the caliper onto the bracket
    • Replace and tighten the T55 Torx bolts
    • Torque the bolts to 30 ft/lbs
  6. Reinstalling the Wheel (8:46 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the 22mm bolts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the center hub nut to a 125 ft/lbs
    • Reattach the center cap
  7. Testing the Brakes (9:33 in the video)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Torx Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench

How-to Video:

(10:03 min)

Tools List:

    Allen Wrenches

  • 5mm Allen Wrench

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Torx Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench




Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 4WD Front Wheel Bearing & Hub Assembly Pair
  • 2004 Chevy Silverado 1500 4WD Front Wheel Bearing & Hub Assembly for Models with 8 Lug Wheel Pair
  • 2001-2003 Chevy Silverado 1500 HD 4WD Front Wheel Bearing & Hub Assembly Pair
  • 2005-2007 Chevy Silverado 1500 HD 4WD Front Wheel Bearing & Hub Assembly Pair
  • 1999-2004 Chevy Silverado 2500 4WD Front Wheel Bearing & Hub Assembly Pair
  • 2001-2006 Chevy Silverado 2500 HD 4WD Front Wheel Bearing & Hub Assembly Pair
  • 2007 Chevy Silverado 2500 HD Classic 4WD Front Wheel Bearing & Hub Assembly Pair
  • 2001-2006 Chevy Silverado 3500 4WD Front Wheel Bearing & Hub Assembly for Models with Brake Option JH6 Pair & Single Rear Wheels (SRW)
  • 2007 Chevy Silverado 3500 Classic 4WD Front Wheel Bearing & Hub Assembly for Models with Brake Option JH6 Pair & Single Rear Wheels (SRW)
  • 2000-2006 Chevy Suburban 2500 4WD Front Wheel Bearing & Hub Assembly Pair
  • 2004 GMC Sierra 1500 4WD Front Wheel Bearing & Hub Assembly for 8 Lug Wheels Pair
  • 2001-2003 GMC Sierra 1500 HD 4WD Front Wheel Bearing & Hub Assembly Pair
  • 2005-2007 GMC Sierra 1500 HD 4WD Front Wheel Bearing & Hub Assembly Pair
  • 1999-2004 GMC Sierra 2500 4WD Front Wheel Bearing & Hub Assembly Pair
  • 2001-2006 GMC Sierra 2500 HD 4WD Front Wheel Bearing & Hub Assembly Pair
  • 2007 GMC Sierra 2500 HD Classic 4WD Front Wheel Bearing & Hub Assembly Pair
  • 2001-2006 GMC Sierra 3500 4WD Front Wheel Bearing & Hub Assembly for Models with Brake Option JH6 Pair & Single Rear Wheels (SRW)
  • 2007 GMC Sierra 3500 Classic 4WD Front Wheel Bearing & Hub Assembly for Models with Brake Option JH6 Pair & Single Rear Wheels (SRW)
  • 2000-2006 GMC Yukon XL 2500 4WD Front Wheel Bearing & Hub Assembly Pair
  • 2003-2007 Hummer H2 4WD Front Wheel Bearing & Hub Assembly Pair
$150.45
Save 81%
List: $807.20 Save: $656.75
Part #: 1ASHS00043

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est