1998-1998 Volvo S70 Front CV Axle Shaft Passenger Side (A1 Cardone)

Part Details

  • Brands: A1 Cardone
  • Location: Front
  • Location: Passenger Side

This part replaces:

  • A1 CARDONE 66-9208

  • New

This axle shaft is a new, aftermarket part. It is just what you need to get your vehicle in good working order!


  • Fits RH (Passenger Side) FRONT
  • CV Style Axle Shaft
  • Brand New, not refurbished or rebuilt
  • Built to strict quality control standards
  • No core charge
  • Correct for models with or without ABS (Anti-Lock Brakes)

Features & Benefits of each NEW CV (Constant Velocity) axle shaft:

  • 100% Neoprene Boots for excellent Ozone resistance. - Eliminates cracking; a leading cause for failure of CV boots
  • 3% moly grease. - Provides excellent high temperature and extreme pressure characteristics which extends the life of the joint
  • Axle nut supplied 100%. - If axle nut from the vehicle is worn or stripped there is no need to buy a separate axle nut because it is provided
  • Splines rolled 100%. - Guarantees proper installation of axle into mating hub and transmission eliminating installation hassle
  • Threads rolled 100%. - Guarantees proper installation of axle nut eliminating installation hassle

Note: This is for one axle shaft assembly.

Axle shafts may need replacing for a variety of different reasons. On vehicles that do heavy work or endure other extreme use you can actually break an axle or strip the splines or teeth. More often the CV joint wears out causing noises and vibration while accelerating or turning.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel
    • Loosen the lug nuts with your 19 mm socket and ratchet or a lug wrench.
    • Raise and secure the vehicle.
  2. Remove the brakes
    • Check out our other videos for more detailed instructions on brakes
  3. remove or move the strut out of the way
    • Hit the top three nuts and bottom two with penetrating oil
    • Loosen two or remove two of the 13 mm bolts.
    • disconnect the stabilizer link from the strut
    • Use a 17 mm socket to break the stabilizer link nut loose and then use an Allen wrench and a wrench to remove it the rest of the way.
    • Unclip the ABS cable from the strut.
    • Remove the 18 mm bolts at the bottom of the strut.
    • Move the strut to the side.
  4. Remove the CV Joint Axle
    • Use a hammer and a socket extension to drive out the axle.
    • Unbolt the axle from the transmission using a 12 mm socket and ratchet
    • Pull your axle out of the car.
    • Replace with your new axle.
    • Bolt the new axle into the transmission and torque the cap bolts to 35 ft lbs.
    • Work the axle into the hub.
    • Fit the strut into the steering knuckle and bolt in the 18 mm bolts.
    • Torque the 18 mm bolts to 55 to 60 ft lbs.
    • Tighten the top three nuts to 20 to 22 ft lbs.
  5. Reassemble the stabilizer links and brakes
    • Tighten together the stabilizer link.
    • Clip the ABS cable back onto the strut.
    • Check out our other videos for more detailed brake assembly instructions.
  6. Put the wheel back on.
    • Hand tighten the lug nuts
    • Lower the vehicle
    • See your owner’s for torque specs for the hub nut or bolt.
    • Torque the lug nuts in a star pattern to 100 ft lbs.

How-to Video:

(13:17 min)

Tools List:

    Allen Wrenches

  • 7mm Allen Wrench

  • Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket
  • 12mm Socket
  • 13mm Socket
  • 14mm Socket
  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Wrenches - Metric

  • 10mm Wrench
  • 11mm Wrench
  • 12mm Wrench
  • 13mm Wrench
  • 14mm Wrench
  • 15mm Wrench
  • 16mm Wrench
  • 17mm Wrench
  • 18mm Wrench
  • 19mm Wrench

This part replaces:

  • A1 CARDONE 66-9208

Vehicle Fit

  • 1993-1997 Volvo 850 Front CV Axle Shaft Passenger Side (A1 Cardone)
  • 1998 Volvo C70 Front CV Axle Shaft Passenger Side (A1 Cardone)
  • 1999 Volvo C70 Front CV Axle Shaft for L5 2.4L Passenger Side (A1 Cardone)
  • 1998 Volvo S70 Front CV Axle Shaft Passenger Side (A1 Cardone)
  • 1998 Volvo V70 Front CV Axle Shaft (excluding R Model) (excluding All Wheel Drive Models) Passenger Side (A1 Cardone)
Part #: CAACV00043

- Ships Same Day for orders placed by 5 P.M. ET


Check Shipping Rates
Brand #: 66-9208

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!


hablamos Español:866-401-3393
For Orders Placed By 5pm Est