Replaces

1995-1998 VW Golf Hatchback Manual Window Regulator Front Driver Side

Part Details

  • Operation: Manual
  • Location: Driver Side
  • Location: Front

This part replaces:

  • OE # 1H0837401B
  • HOLLANDER 125-58500L

  • New

This manual window regulator is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH (Driver Side) FRONT DOOR
  • Replaces dealer part numbers: 1H0 837 401 B, 1H0837401B
  • New, not rebuilt
  • Direct bolt on
  • Built to strict quality control standards
  • Does not fit cabriolet models (convertibles)

NOTE: The VIN code is the 8th digit of your VIN (vehicle identification number). You can find your vehicles VIN in the driver's side lower corner of the windshield near the A pillar, on your title, or on your state registration.

This manual window regulator makes a great replacement and has good cost savings over a dealer unit.

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it, you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

 

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Door Panel (1:01 in the video)
    • Push the window crank ring back
    • Pull off the window crank
    • Pull the mirror knob off by hand
    • Pry out the speaker grill with a flat blade screwdriver
    • Pry off the mirror base trim panel with a flat blade screwdriver
    • Pull the plastic grommets out of the mirror base trim panel
    • Push the grommets back into the door at the mirror base
    • Pry off the door pull panel with a flat blade screwdriver
    • Twist off the door lock knob
    • Remove the small Phillips head screw inside the door handle
    • Remove the two Phillips head screws from the door pull
    • Remove the six T10 Torx screws from around the door panel
    • Pry out the speaker with a flat blade screwdriver
    • Disconnect the speaker wiring harness
    • Pry off the door panel by hand
    • Disconnect the door lock
    • Pull the door handle off
    • Disconnect the door handle from the latch rod
    • Carefully peel off the water shield
  2. Removing the Window Regulator (7:08 in the video)
    • Put the window crank on
    • Lower the window with the crank
    • Pull off the window crank
    • Remove the two 10mm nuts from the window track
    • Pull the window up by hand
    • Loosen the five 10mm bolts on the window regulator
    • Pull the regulator rails loose
    • Release the regulator cables from their clips
    • Pull the regulator out of the door
  3. Installing the New Window Regulator (9:50 in the video)
    • Transfer the five 10mm bolts to the new regulator
    • Transfer the cable clip to the new regulator
    • Maneuver the regulator up into the door
    • Clip on the regulator cable clip
    • Hang the regulator rails by their bolts
    • Tighten the five 10mm bolts
    • Lower the window on to the window track by hand
    • Put on the crank handle
    • Test that the window moves with the crank
    • Remove the crank handle
    • Tighten the two 10mm nuts for the window track
  4. Reinstalling the Door Panel (12:37 in the video)
    • Put the water shield back in place
    • Attach the door handle to its latch rod
    • Push the door handle into place with the gasket behind it
    • Connect the door lock to the door panel
    • Push the door panel on
    • Insert the small Phillips head screw into the door handle
    • Insert the two Phillips head screws into the door pull
    • Connect the speaker to its wiring harness
    • Push the speaker in using the locating tabs
    • Insert the four Phillips screws into the speaker
    • Push the speaker grill on
    • Push the window crank on
    • Push the door pull trim panel on
    • Push on the mirror knob on
    • Push on the mirror base trim
    • Insert the six T10 Torx screws into the door panel
    • Twist on the lock knob

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench

How-to Video:

(15:40 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench



This part replaces:

  • OE # 1H0837401B
  • HOLLANDER 125-58500L

Vehicle Fit

  • 1995-1998 VW Golf Hatchback Manual Window Regulator Front Driver Side
  • 1999 VW Golf Hatchback Manual Window Regulator Front Driver Side (8th Vin Digit H)
  • 1993-1998 VW Jetta Manual Window Regulator Front Driver Side
  • 1999 VW Jetta Manual Window Regulator Front Driver Side (8th Vin Digit H)
$50.45
Save 59%
List: $122.00 Save: $71.55
Part #: 1AWRG02029

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est