Replaces

2002-2005 Ford Explorer Turn Signal Wiper Switch

This part replaces:

  • OE # 2L2Z 13K359 AAB
  • STANDARD MOTOR PRODUCTS CBS-1172
  • HOLLANDER 629-00670, 629-00706

  • New

This combination wiper, headlight high beam dimmer, and turn signal switch lever is a new, aftermarket replacement part. It is designed to REPLACE original units that are prone to failure. It's just what you need to get your vehicle in good working order again!

Specifications:

  • Mounts to steering column
  • Replaces dealer part numbers: 2L2Z 13K359 AAB, 2L2Z13K359AAB, 1L2T13K359AGJAEA, 1L2T 13K359 AGJAEA, 1L2TAGJAEA, 1L2T AGJAEA, SW5676, SW6072
  • Direct replacement
  • Design improved for more durability
  • Detailed graphics
  • Built to strict quality control standards
  • Has rear wiper control

This combination lever is designed to replace your original with no modifications necessary.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Turn Signal Wiper Switch (0:40 in the video)
    • Remove the two 7mm bolts from the lower dash panel
    • Move the steering wheel up
    • Remove the lower dash panel
    • Remove the two Phillips screws under the steering wheel
    • Pull the lower steering column panel down
    • Remove the Phillips screw in the upper steering column panel
    • Remove the grommet around the ignition switch
    • Lift the upper panel up
    • Remove the 7/32 inch bolt from the upper part of the steering wheel
    • Push in the tab on the turn signal
    • Disconnect the turn signal switch wiring harnesses
    • Remove the turn signal wiper switch
  2. Installing the New Turn Signal Wiper Switch (3:23 in the video)
    • Insert the switch into place
    • Connect the turn signal switch wiring harnesses
    • Fit the grooves of the switch into place on the upper part of the steering wheel
    • Insert the top steering column panel into place
    • Insert the Phillips screw into the top steering column panel
    • Insert the lower steering wheel panel into place
    • Push the grommet over the ignition switch into place
    • Replace the two Phillips screws on the lower steering column panel
    • Push the lower dash panel into place
    • Insert the two 7mm bolts into the lower dash panel

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 5.5mm Socket
  • 7mm Socket

  • Sockets - SAE

  • 7/32 Inch Socket

How-to Video:

(06:13 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 5.5mm Socket
  • 7mm Socket

  • Sockets - SAE

  • 7/32 Inch Socket



This part replaces:

  • OE # 2L2Z 13K359 AAB
  • STANDARD MOTOR PRODUCTS CBS-1172
  • HOLLANDER 629-00670, 629-00706

Vehicle Fit

  • 2003-2006 Ford Expedition Turn Signal Wiper Switch
  • 2002-2005 Ford Explorer Turn Signal Wiper Switch
  • 2002-2005 Mercury Mountaineer Turn Signal Wiper Switch
$61.95
Save 43%
List: $109.02 Save: $47.07
Part #: 1AZCC00176

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est