Replaces

2004-2006 Toyota Camry Rear Brake Drum & Shoe Kit (Japan Built Models)

Part Details

  • Front / Rear Location: Rear

  • New

This brake drum & shoe set is just what you need to get your vehicle stopping in good order again!

Rear Brake Shoe Specifications:

  • Comes as a SET
  • Fits both the LH (Driver) & RH (Passenger Side) REAR
  • Premium Grade Brake Shoes
  • Direct replacement

Rear Drum Specifications::

  • Comes as a PAIR
  • Fits both the LH (Driver) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 4243128100, 42431 28100, 4243142050, 42431 42050
  • Direct replacements
  • Fits 5 lug wheels
  • Correct shoe size: 228mm x 54mm

This rear brake drum & shoe set makes a great replacement and has an excellent value over the price of dealer shoes & brake drums.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:52)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack near the pinch weld
    • Secure the vehicle on jack stands at the unibody frame rail, and place it just ahead of the lower control arm on the rear
    • Repeat the process for the other side so the vehicle is level
    • Remove the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Brake Shoes (1:18)
    • Pull off the brake drum
    • Remove the brake shoe springs with the vise grip pliers
    • Hold the front retaining pin in place by hand
    • Twist off the front retaining spring with the vise grip pliers
    • Remove the retaining pin
    • Repeat the process for the other shoe
    • Hold the rear retaining pin in place by hand
    • Twist off the rear retaining spring with the vise grip pliers
    • Remove the rear brake shoe
    • Pry the emergency brake cable out of the front brake shoe
    • Remove the spring-loaded snap clip with a flat blade screwdriver
    • Remove the clip, spring, and brake adjustor
    • Pry off the horseshoe clip and remove the arm from the front brake shoe
  3. Installing the New Brake Shoes (6:51)
    • Spray the backing plate surface with brake cleaner
    • Spray the adjustor wheel and e-brake with brake cleaner
    • Insert the e-brake arm into the brake
    • Press on a new horseshoe clip
    • Clamp the horseshoe clip with pliers
    • Tighten down the brake adjustor
    • Place the adjustor into the spring
    • Insert the spring and adjustor to the shoe
    • Insert the adjustor arm into place
    • Snap the ring onto the adjuster arm
    • Reinstall the spring to the arm
    • Lift the brake shoe into place
    • Insert the e-brake spring to the brake shoe
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Put the rear brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Push the brake shoes together by hand
    • Adjust the shoes so they touch the surface of the drum
    • Hook the springs on with the vise grip pliers
    • Slide the brake drum on
  4. Reattaching the Wheel (13:07)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Align the notch with the valve stem, and reinstall your hubcap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(13:47 min)

Tools List:

    General Tools

  • Jack Stands
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket




Vehicle Fit

  • 1992-2003 Toyota Camry Rear Brake Drum & Shoe Kit
  • 2004-2006 Toyota Camry Rear Brake Drum & Shoe Kit (Japan Built Models)
  • 1999-2003 Toyota Solara Rear Brake Drum & Shoe Kit
Part #: 1ABDS00262

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est