Replaces

2004-2006 Toyota Tundra Double Cab Oak Interior Door Handle Bezel Front or Rear Passenger Side

Part Details

  • Colors: Oak
  • Side Location: Passenger Side
  • Front / Rear Location: Front or Rear

This part replaces:

  • OE # 69277-AC010-A0

  • New

This replacement inside door handle bezel or frame is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits RH (Passenger Side) FRONT or REAR Door
  • Plastic construction
  • Replaces dealer part number: 69277-AC010-A0, 69277AC010A0
  • Oak (Light Tan) Finish
  • Direct replacement
  • Built to strict quality control standards

This inside door handle bezel is a great replacement and has good cost savings over the dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Disconnecting the Battery (0:41 in the video)
    • Disconnect the negative battery cable with an 8mm wrench
  2. Removing the Door Panel (0:52 in the video)
    • Pry off the mirror base trim panel with a flat blade screwdriver
    • Pry off the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harness
    • Pry off the screw cover panel below the door pull with a flat blade screwdriver
    • Pry off the courtesy light with a flat blade screwdriver
    • Disconnect the courtesy light wiring harness
    • Pry off the door handle trim piece with a flat blade screwdriver
    • Pry off the screw cover panel at the top front corner of the door with a flat blade screwdriver
    • Remove the Phillips head screw at the top front corner of the door
    • Remove the Phillips head screw inside the door handle
    • Remove the Phillips head screw below the door pull
    • Pry off the door handle bezel with a flat blade screwdriver
    • Push in the clips at the back of the door panel
    • Pull the clips out of the back door panel
    • Pry the door panel off of its clips with a putty knife or door panel clip tool
    • Remove any clips that remain in the door with needle nose pliers
    • Push those clips into the door panel
  3. Removing the Door Handle (4:06 in the video)
    • Slide the door handle back and pull it off
    • Pull the cables out of the door handle
  4. Installing the New Door Handle (4:24 in the video)
    • Turn the new door handle upside down
    • Put the top cable into the lower clip (still holding the handle upside down)
    • Put the bottom cable into the lower clip (still holding the handle upside down)
    • Turn the handle right side up
    • Push the door handle into place
  5. Reinstalling the Door Panel (5:07 in the video)
    • Put the door panel into place, pulling the wiring harnesses through their cavities
    • Push the door panel clips in
    • Push on the mirror base trim panel
    • Push the door handle bezel in
    • Connect the window switch wiring harness
    • Push in the window switch panel
    • Connect the courtesy light wiring harness
    • Push in the courtesy light
    • Insert the Phillips screw below the door pull
    • Insert the Phillips screw into the door handle
    • Insert the Phillips screw at the top front corner of the door panel
    • Push in the screw cover below the door pull
    • Push in the screw cover into the door handle
    • Push in the screw cover at the top front corner of the door panel
    • Push the clips into the back of the door panel
  6. Reconnecting the Battery (6:55 in the video)
    • Reconnect the negative battery cable

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Specialty Tools

  • Door Panel Removal Tool
  • Putty Knife

  • Wrenches - Metric

  • 8mm Wrench

How-to Video:

(07:20 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Specialty Tools

  • Door Panel Removal Tool
  • Putty Knife

  • Wrenches - Metric

  • 8mm Wrench



This part replaces:

  • OE # 69277-AC010-A0

Vehicle Fit

  • 2000-2004 Toyota Avalon Oak Interior Door Handle Bezel Front or Rear Passenger Side
  • 2001-2007 Toyota Sequoia Oak Interior Door Handle Bezel Front or Rear Passenger Side
  • 2004-2006 Toyota Tundra Double Cab Oak Interior Door Handle Bezel Front or Rear Passenger Side
$19.95
Part #: 1ADMX00184

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est