Replaces

2001-2009 Toyota Sequoia Timing Belt Kit with Water Pump for V8 4.7L V8 ( Gates)

This part replaces:

  • Gates TCKWP298

  • New

Gates (TCKWP298) Water Pump and Timing Belt Component Kit

This Gates timing belt component kit, tensioner with water pump is just what you need to keep your vehicle in good running order.

Our timing belt sets come from a company that is committed to supplying components that are engineered and manufactured under strict quality control procedures. They are leaders in timing component quality which provides you with the highest quality parts available on the market.

This high quality, water pump and timing belt kit, contains the following pieces and has the following specifications:

  • (1) - Timing Belt
  • (1) - Tensioner
  • (1) - Hydraulic Tensioner
  • (1) - Idler
  • (1) - Water pump
  • (1) - Water pump gasket

Most car manufacturers recommend changing your timing belt between 50,000 and 70,000 miles (consult your owner's manual to see what your specific manufacturer suggests).

Note:
These parts are authentic Gates brand products that are supplied and packaged by Gates. Some of the components included in this kit may be sourced by Gates from other high quality suppliers such as Aisin, GMB, Koyo & other OEM suppliers. These parts are subjected to the very same testing and quality standards as all Gates products.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Gates Limited Warranty

Purchase with Confidence. Gates is committed to quality!

Merchandise is warrantied to be free from defects in material or workmanship for 18 months from the date of delivery to Purchaser. The Gates Corporation will, at its option, replace or repair any merchandise proved defective in material or workmanship, or both, during the warranty period. This shall be the sole remedy for breach of warranty. All other warranties, express or implied, including, but not limited to, warranties of merchantability or fitness for a particular purpose, hereby are expressly disclaimed. liability for consequential, incidental, special, exemplary and indirect damages, including, but not limited to, lost profits, hereby are expressly excluded, regardless of whether they were reasonably foreseeable, or whether seller had knowledge that they could occur. Exclusion of Warranty The warranty shall be void to the extent that any of the following occurs: (a) improper installation of the Products into vehicles; or (b) improper usage by Purchaser ; or (c) induction of defect by other products; or (d) mishandling of the Products or other abuse; or (e) improper matching with other applications; or (f) collision, engine overheating or oil starvation, product contamination, including, but not limited to, with oil or antifreeze; or (g) the Products are used for racing or competition; or (h) any use not recommended in writing by Gates.

  1. Beginning the Repair (0:37 in the video)
    • This is Part 2 of a two part video
    • Please consult Part 1 for earlier instructions
    • Perform the steps outlined in Pat 1
  2. Positioning the Engine (0:52 in the video)
    • Use a 22mm socket to turn the crank pulley and rotate the engine into the correct position
    • The white mark on the crank pulley should line up with the 0 marker
    • The indentation of the passenger side (right) cam should line up with the timing mark
    • The indentation of the driver side (left) cam should line up with the timing mark
  3. Removing the Harmonic Balancer (1:21 in the video)
    • Remember to put aside any parts you remove in an organized fashion
    • Use a 22mm socket and an impact wrench to remove the crank pulley nut
    • Bolt the harmonic balancer puller to the harmonic balancer
    • Tighten the bolts 5 or 6 turns
    • The bolts should be visible on the back side of the harmonic balancer
    • Thread the larger bolt into the harmonic balance bolt
    • Pull off the harmonic balancer
  4. Removing the Crank Sensor Ring (2:46 in the video)
    • Remove the four 10mm bolts from the crank shield
    • Remove the crank sensor ring
  5. Removing the Old Belt (3:58 in the video)
    • Remove the 12mm bolts from the belt tensioner
    • Pull off the tensioner
    • Pull the crank position sensor wire aside as necessary
  6. Removing the Pulleys (5:06 in the video)
    • Remove the 13mm bolt from the tensioner pulley
    • Remove the tensioner pulley
    • Remove the 14mm bolt from the idler pulley
    • Remove the idler puller
  7. Removing the Water Pump (5:18 in the video)
    • Remove the studs/bolts from the water pump using a 12mm wrench
    • Remove the remaining bolts
    • Make sure all the bolts are removed
    • Carefully pry the water pump off using a screwdriver
    • Carefully pull off the water pump gasket, keeping the rubber in one piece
    • Scrape off any residue or dirt with a razor blade
  8. Installing the New Water Pump (7:13 in the video)
    • Slide the new gasket into place
    • Remove the o-ring
    • Install the new o-ring
    • Slide on the new water pump
    • Move the cam sensor wire aside as necessary
    • Install and hand tighten the water pump fasteners
    • Use the socket to tighten the fasteners
    • Tighten opposite fasteners in order
    • Use a torque wrench to tighten the fasteners to 17 foot-pounds of torque
    • Reinstall the plastic block-off plate
  9. Installing the new Tensioner (9:34 in the video)
    • Install the tensioner spacer
    • Install the tensioner
    • Thread the tensioner bolt
    • Tighten the tensioner bolt with a 3/8 inch Allen wrench
    • Make sure the tensioner pivots freely
  10. Installing the New Idler Pulley (9:59 in the video)
    • Install the new idler pulley
    • Begin threading the bolt by hand
    • Tighten the bolt with a 14mm socket
  11. Installing the New Timing Belt (10:12 in the video)
    • The timing belt has three markers: CR, R-CAM, and L-CAM
    • See [3:37] for more information
    • Line up the CR marker with the white dot on the crank
    • Line up the L-CAM marker with the timing marker on the left cam
    • Line up the R-CAM marker with the timing marker on the right cam
    • Wrap the belt around the crank and left cam
    • Lightly pull the left cam as you stretch the belt onto the right cam
    • Push the belt onto the right cam
    • Check that all the timing markers are lined up
  12. Reinstalling Other Timing Parts (13:20 in the video)
    • Reinstall the tensioner
    • Reinstall the crank sensor wheel and crank shield
    • Reinstall the harmonic balancer and crank pulley
  13. Checking the Timing System (14:22 in the video)
    • Check that all the timing marks line up properly
    • Turn the crank pulley with a socket and breaker bar to rotate the engine
    • Make sure the timing marks still line up properly
  14. Reinstalling the Other Engine Parts (15:19 in the video)
    • Reinstall parts to the front of the engine by reversing the steps outlined in Part 1

Tools needed for replacement:

    Air Powered Tools

  • 1/2 Inch Air Impact Gun

  • Allen Wrenches

  • 3/8 Inch Allen Wrench

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket
  • 12mm Socket
  • 13mm Socket
  • 14mm Socket
  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket
  • 20mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Drain Pan
  • Floor Jack
  • Harmonic Balancer Holding Tool
  • Harmonic Balancer Puller
  • Jack Stands
  • Razor Blade / Gasket Scraper

  • Wrenches - Metric

  • 10mm Wrench
  • 11mm Wrench
  • 12mm Wrench
  • 13mm Wrench
  • 14mm Wrench
  • 15mm Wrench
  • 16mm Wrench
  • 17mm Wrench
  • 18mm Wrench
  • 19mm Wrench
  • 21mm wrench
  • 22mm Wrench

How-to Video:

(15:35 min)

Tools List:

    Air Powered Tools

  • 1/2 Inch Air Impact Gun

  • Allen Wrenches

  • 3/8 Inch Allen Wrench

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket
  • 12mm Socket
  • 13mm Socket
  • 14mm Socket
  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket
  • 20mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Drain Pan
  • Floor Jack
  • Harmonic Balancer Holding Tool
  • Harmonic Balancer Puller
  • Jack Stands
  • Razor Blade / Gasket Scraper

  • Wrenches - Metric

  • 10mm Wrench
  • 11mm Wrench
  • 12mm Wrench
  • 13mm Wrench
  • 14mm Wrench
  • 15mm Wrench
  • 16mm Wrench
  • 17mm Wrench
  • 18mm Wrench
  • 19mm Wrench
  • 21mm wrench
  • 22mm Wrench



This part replaces:

  • Gates TCKWP298

Vehicle Fit

  • 1998-2000 Lexus GS400 Timing Belt Kit with Water Pump for V8 4.0L ( Gates)
  • 2001-2007 Lexus GS430 Timing Belt Kit with Water Pump for V8 4.3L ( Gates)
  • 2003-2009 Lexus GX470 Timing Belt Kit with Water Pump for V8 4.7L V8 ( Gates)
  • 1998-2000 Lexus LS400 Timing Belt Kit with Water Pump for V8 4.0L ( Gates)
  • 2001-2006 Lexus LS430 Timing Belt Kit with Water Pump for V8 4.3L ( Gates)
  • 1998-2007 Lexus LX470 Timing Belt Kit with Water Pump for V8 4.7L V8 ( Gates)
  • 1998-2000 Lexus SC400 Timing Belt Kit with Water Pump for V8 4.0L ( Gates)
  • 2002-2010 Lexus SC430 Timing Belt Kit with Water Pump for V8 4.3L ( Gates)
  • 2003-2009 Toyota 4Runner Timing Belt Kit with Water Pump for V8 4.7L V8 ( Gates)
  • 1998-2007 Toyota Land Cruiser Timing Belt Kit with Water Pump for V8 4.7L V8 ( Gates)
  • 2001-2009 Toyota Sequoia Timing Belt Kit with Water Pump for V8 4.7L V8 ( Gates)
  • 2000-2009 Toyota Tundra Timing Belt Kit with Water Pump for V8 4.7L V8 ( Gates)
$220.45
Part #: GAEEK00022

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
GATES
Brand #: TCKWP298

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est