Replaces

1995-1998 Nissan 240SX Front Outer Tie Rod Driver or Passenger Side

This part replaces:

  • OE # 485200M025, 485200M085

  • New

This outer tie rod end is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT OUTER
  • Replaces dealer part numbers: 48520-0M-085, 485200M085
  • Direct replacement
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. remove the wheel (0:50 in the video)
    • Loosen your lug nuts
    • Raise and secure your vehicle
    • Remove the lug nuts and the wheel
  2. Remove the tie rod (1:13 in the video)
    • Measure your tie rod to help make a preliminary alignment later.
    • Remove the cotter pin in the castle nut.
    • Remove the 19 mm castle nut.
    • Use a hammer to break the tie rod free and lift it up and out.
    • Unscrew the outer tie rod and remove it.
  3. Install the new outer tie rod (2:09 in the video)
    • Install the grease fitting.
    • Put the outer tie rod onto the inner tie rod.
    • Place the tie rod end into the knuckle.
    • Replace the 19 mm castle nut.
    • Measure your tie rod and make sure it is the same distance as the old one.
    • Tighten up the middle nut when it is.
    • Put your cotter pin into the castle nut.
  4. Put your wheel back on (3:30 in the video)
    • Thread the lug nuts.
    • Lower the vehicle
    • Tighten the lug nuts to 100 ft lbs.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket
  • 7mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands

How-to Video:

(04:01 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket
  • 7mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands



This part replaces:

  • OE # 485200M025, 485200M085

Vehicle Fit

  • 1996-2001 Infiniti I30 Front Outer Tie Rod Driver or Passenger Side
  • 2002-2004 Infiniti I35 Front Outer Tie Rod Driver or Passenger Side
  • 1995-1998 Nissan 240SX Front Outer Tie Rod Driver or Passenger Side
  • 2002-2006 Nissan Altima Front Outer Tie Rod Driver or Passenger Side
  • 1995-2008 Nissan Maxima Front Outer Tie Rod Driver or Passenger Side
$29.45
Save 69%
List: $96.03 Save: $66.58
Part #: 1ASTE00090

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More

Recently Viewed

Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est