Replaces

1994-1997 Honda Accord Front Outer Tie Rod End Driver Side (Moog)

This part replaces:

  • MOOG ES3392R
  • OE # 53560-SV4-013

  • New

MOOG ES3392R [OUTER TIE ROD END - DRIVER SIDE]

FRONT; CONNECTS TO INNER TIE ROD

This Moog brand Outer Tie Rod End on Driver Side is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Fits LH (Driver Side) FRONT OUTER
  • Connects to Inner Tie Rod
  • Replaces dealer part number: 53560-SV4-013, 53560SV4013
  • Direct replacement
  • Built to strict quality control standards

When installed correctly and an alignment performed, this tie rod end could also reduce uneven tire wear.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheels
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the wheel
  2. Remove the tie rod
    • Mark the alignment on the tie rod with a sharpie.
    • Use two wrenches to loosen up the tie rod nut.
    • Remove the cotter pin and remove the 16 mm nut.
    • Use a tie rod puller to pry out the tie rod.
    • Unscrew the tie rod.
  3. Install the new tie rod
    • Adjust the new locking nut to the same spot that the old one was (where you made your mark)
    • Screw in the new tie rod.
    • Install the cotter pin and bolt on the 17mm nut.
    • Install the cotterpin.
    • Use a grease gun to fill the joint.
  4. Replace the wheel
    • Put the wheel on and hand tighten the lug nuts
    • Lower the car and torque the lug nuts to 80 ft lbs.

How-to Video:

(08:20 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Grease Gun
  • Jack Stands
  • Tie Rod Puller



This part replaces:

  • MOOG ES3392R
  • OE # 53560-SV4-013

Vehicle Fit

  • 1997-1999 Acura CL Front Outer Tie Rod End Driver Side (Moog)
  • 1994-1997 Honda Accord Front Outer Tie Rod End Driver Side (Moog)
  • 1995-1997 Honda Odyssey Front Outer Tie Rod End Driver Side (Moog)
  • 1996-1999 Isuzu Oasis Front Outer Tie Rod End Driver Side (Moog)
$50.45
Part #: MGSTE00036

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
MOOG
Brand #: ES3392R

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est