Replaces

1995-1997 Honda Odyssey Front Outer Tie Rod End Pair

Part Details

  • Location: Outer
  • Location: Front
  • Quantity: Pair

  • New

These outer tie rod ends are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT OUTER
  • Connect to Inner Tie Rods
  • Replaces dealer part numbers: 53540-SV4-003, 53540-SV4-013, 53540-SV7-003, 53540-SX0-003, 53560-SV4-003, 53560-SV4-013, 53560-SV7-003, 53560-SX0-003, 53540SV4003, 53540SV4013, 53540SV7003, 53540SX0003, 53560SV4003, 53560SV4013, 53560SV7003, 53560SX0003
  • Direct replacements
  • Built to strict quality control standards

When installed correctly and an alignment performed, these tie rod ends could also reduce uneven tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheels (1:00 in the video)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the wheel
  2. Remove the tie rod (1:32 in the video)
    • Mark the alignment on the tie rod with a sharpie.
    • Use two wrenches to loosen up the tie rod nut.
    • Remove the cotter pin and remove the 16 mm nut.
    • Use a tie rod puller to pry out the tie rod.
    • Unscrew the tie rod.
  3. Install the new tie rod (4:05 in the video)
    • Adjust the new locking nut to the same spot that the old one was (where you made your mark)
    • Screw in the new tie rod.
    • Install the cotter pin and bolt on the 17mm nut.
    • Install the cotterpin.
    • Use a grease gun to fill the joint.
  4. Replace the wheel (7:15 in the video)
    • Put the wheel on and hand tighten the lug nuts
    • Lower the car and torque the lug nuts to 80 ft lbs.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Grease Gun
  • Jack Stands
  • Tie Rod Puller

How-to Video:

(08:20 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Grease Gun
  • Jack Stands
  • Tie Rod Puller




Vehicle Fit

  • 1997-1999 Acura CL Front Outer Tie Rod End Pair
  • 1994-1997 Honda Accord Front Outer Tie Rod End Pair
  • 1995-1997 Honda Odyssey Front Outer Tie Rod End Pair
  • 1996-1999 Isuzu Oasis Front Outer Tie Rod End Pair
$40.45
Save 57%
List: $93.80 Save: $53.35
Part #: 1ASFK01223

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est