Replaces

Tie Rod Front Pair - 1ASFK00489

Part Details

  • Location: Inner
  • Location: Front
  • Quantity: Pair

  • New

These inner tie rod ends are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT INNER
  • Relaces dealer part numbers: 4656139, 4764995AF, 4764995AJ, 4879419AB, 4879419AF
  • Direct replacements
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:35 in the video)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Outer Tie Rod (0:59 in the video)
    • Turn the wheels by hand for better access to the tie rod
    • Remove the cotter pin from the outer tie rod with pliers
    • Remove the castle nut from the tie rod with an adjustable wrench
    • Measure the distance from the inner tie rod to the end of the outer tie rod
    • Note that measurement
    • Loosen the nut that connects the outer to the inner tie rod
    • Strike the wheel knuckle with a hammer to loosen the outer tie rod
    • Lift the outer tie rod out of the wheel knuckle
    • Twist off the outer tie rod
  3. Removing the Inner Tie Rod (1:59 in the video)
    • Twist off the nut that connects the outer to the inner tie rod
    • Pull the small boot clamp off the inner tie rod with pliers
    • Pry off the large boot clamp with a hammer and a flat blade screwdriver
    • Pull off the boot
    • Remove the inner tie rod with a pipe wrench
  4. Installing the New Inner Tie Rod (2:46 in the video)
    • Twist the new inner tie rod into place
    • Put a wire tie on the large end of the boot
    • Put the boot into place
    • Tighten the wire tie
    • Push on the small boot clamp with pliers
    • Twist on the nut that connects the outer to the inner tie rod
  5. Reinstalling the Outer Tie Rod (3:43 in the video)
    • Twist your outer tie rod onto the inner tie rod
    • Measure the distance from the inner tie rod to the end of the outer tie rod
    • This should be the same measurement as noted in Step 2
    • Thread the nut that connects the outer to the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the castle nut onto the outer tie rod
    • Line up the castle nut with the cotter pin hole
    • Push the cotter pin into place
    • Twist the cotter pin into place with pliers
    • Tighten the nut that connects the outer to the inner tie rod
    • Fill the outer tie rod bearing with bearing grease, using a grease gun
  6. Reattaching the Wheel (4:56 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque in a crossing or star pattern

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Bearing Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers
  • Pipe Wrench

  • Ratchets & Related

  • Torque Wrench

  • Specialty Tools

  • Floor Jack
  • Grease Gun
  • Hammer
  • Jack Stands

How-to Video:

(05:28 min)

Tools List:

    Materials, Fluids, and Supplies

  • Bearing Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers
  • Pipe Wrench

  • Ratchets & Related

  • Torque Wrench

  • Specialty Tools

  • Floor Jack
  • Grease Gun
  • Hammer
  • Jack Stands




Vehicle Fit

  • 1995-2000 Chrysler Cirrus Front Inner Tie Rod End Pair
  • 1996-2005 Chrysler Sebring Convertible Front Inner Tie Rod End Pair
  • 2001-2005 Chrysler Sebring Sedan Front Inner Tie Rod End Pair
  • 1995-2000 Dodge Stratus Front Inner Tie Rod End Pair
  • 2001-2005 Dodge Stratus Sedan Front Inner Tie Rod End Pair
  • 2006 Dodge Stratus Front Inner Tie Rod End Pair
  • 1996-2000 Plymouth Breeze Front Inner Tie Rod End Pair
$40.45
Part #: 1ASFK00489

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est