Replaces

2006 Ford Ranger Front Sway Bar Link Pair

Guaranteed to Fit

2006 Ford Ranger

Fit Details

  • Front / Rear Location: Front

Part Details

  • Quantity: Pair

  • New

Your front sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links and bushings are. Most commonly the rubber bushings dry and crack over time and will eventually split and fall off.

Specifications:

  • Comes as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side)
  • Kit includes:
    • (2) Links (Bolts)
    • (2) Sleeves
    • (8) Rubber Bushings
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. These sway bar links are direct replacement parts that fit and function as the originals did.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:45)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Sway Bar Link (1:09)
    • Hold the sway bar link stud with a 16mm wrench
    • Remove the 15mm nut from the sway bar link
    • If the sway bar link is broken, fill the tube with rust penetrant
    • Hold the tube with vise grip pliers
    • Loosen the sway bar link stud with a 16mm socket and ratchet
    • Pull off the plastic tube
    • Remove any remaining plastic with a hammer and chisel
    • Loosen the sway bar link stud with a 16mm socket and ratchet
    • Push out the stud with a hammer
  3. Installing the Sway Bar Link (2:55)
    • Lift the opposite side of the vehicle with a jack
    • Put a washer onto the sway bar link stud
    • Put on a bushing
    • Put the sway bar link into place, through the control arm
    • Put on a bushing
    • Put on a washer
    • Put on the plastic tube
    • Put on a washer
    • Put on a bushing
    • Put the sway bar link into place, through the sway bar
    • Put on a bushing
    • Put on a washer
    • Thread on the 16mm nut
    • Tighten the nut preliminarily
    • Lower the jack
    • Support the suspension at ride height with a jack
    • Tighten the 16mm nut until the bushings are the same thickness as the washers
  4. Reattaching the Wheel (4:31)
    • Clip the ABS sensor wiring into place
    • Wipe down the rotor
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Chisel
  • Jack Stands
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - Metric

  • 16mm Socket
  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 16mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
What are total length of these sway bar links?
Joshua B on Jan 28, 2016
BEST ANSWER: Hello, The length specs are not available as these are a direct fit for the exact models listed in the fit list. These will replace the OE parts without any modifications.

How-to Video:

(05:33 min)

Tools List:

    General Tools

  • Floor Jack
  • Chisel
  • Jack Stands
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - Metric

  • 16mm Socket
  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 16mm Wrench




Vehicle Fit

  • 1994-2001 Dodge Ram 1500 Truck 2 Wheel Drive Front Sway Bar Link Pair
  • 1994-2002 Dodge Ram 2500 Truck 2 Wheel Drive Front Sway Bar Link Pair
  • 1994-2002 Dodge Ram 3500 Truck 2 Wheel Drive Front Sway Bar Link Pair
  • 1995-2010 Ford Explorer Front Sway Bar Link Pair
  • 2001-2010 Ford Explorer Sport Trac Front Sway Bar Link Pair
  • 1998-2011 Ford Ranger Front Sway Bar Link Pair
  • 2001-2008 Mazda B2300 Truck Front Sway Bar Link Pair
  • 1998-2001 Mazda B2500 Truck Front Sway Bar Link Pair
  • 1998-2007 Mazda B3000 Truck Front Sway Bar Link Pair
  • 1998-2008 Mazda B4000 Truck Front Sway Bar Link Pair
  • 1997-2010 Mercury Mountaineer Front Sway Bar Link Pair
$ 33.95
Save 61%
List: $87.95 Save: $54.00
Part #: 1ASSL00003

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est