Replaces

2001-2010 Ford Explorer Sport Trac Front Sway Bar Link Kit Pair (Moog)

Part Details

  • Brands: Moog
  • Front / Rear Location: Front
  • Quantity: Pair

This part replaces:

  • MOOG K7275

  • New

MOOG K7275 [FRONT SWAY BAR LINK KIT PAIR]

These Moog brand replacement FRONT Sway Bar Link kits are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Your front sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time the ball & socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces one of many dealer part numbers including: 2L2Z-5K483-BA, 2L2Z-5K483-AA, 2L2Z-5K483-A, 6L2Z-5K483-AA, 2L2Z5K483BA, 2L2Z5K483AA, 2L2Z5K483A, 6L2Z5K483AA, 52038115, 52038116, 52037916, 52037712AB
  • Connects sway bar to control arms
  • Direct replacements
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:45)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Sway Bar Link (1:09)
    • Hold the sway bar link stud with a 16mm wrench
    • Remove the 15mm nut from the sway bar link
    • If the sway bar link is broken, fill the tube with rust penetrant
    • Hold the tube with vise grip pliers
    • Loosen the sway bar link stud with a 16mm socket and ratchet
    • Pull off the plastic tube
    • Remove any remaining plastic with a hammer and chisel
    • Loosen the sway bar link stud with a 16mm socket and ratchet
    • Push out the stud with a hammer
  3. Installing the Sway Bar Link (2:55)
    • Lift the opposite side of the vehicle with a jack
    • Put a washer onto the sway bar link stud
    • Put on a bushing
    • Put the sway bar link into place, through the control arm
    • Put on a bushing
    • Put on a washer
    • Put on the plastic tube
    • Put on a washer
    • Put on a bushing
    • Put the sway bar link into place, through the sway bar
    • Put on a bushing
    • Put on a washer
    • Thread on the 16mm nut
    • Tighten the nut preliminarily
    • Lower the jack
    • Support the suspension at ride height with a jack
    • Tighten the 16mm nut until the bushings are the same thickness as the washers
  4. Reattaching the Wheel (4:31)
    • Clip the ABS sensor wiring into place
    • Wipe down the rotor
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Chisel
  • Jack Stands
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - Metric

  • 16mm Socket
  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 16mm Wrench

How-to Video:

(05:33 min)

Tools List:

    General Tools

  • Floor Jack
  • Chisel
  • Jack Stands
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - Metric

  • 16mm Socket
  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 16mm Wrench



This part replaces:

  • MOOG K7275

Vehicle Fit

  • 1994-2001 Dodge Ram 1500 Truck 2WD Front Sway Bar Link Kit for Models with Independent Front Suspension Pair (Moog)
  • 1994-2002 Dodge Ram 2500 Truck 2WD Front Sway Bar Link Kit for Models with Independent Front Suspension Pair (Moog)
  • 1994-2002 Dodge Ram 3500 Truck 2WD Front Sway Bar Link Kit for Models with Independent Front Suspension Pair (Moog)
  • 1995-2010 Ford Explorer Front Sway Bar Link Kit Pair (Moog)
  • 2001-2010 Ford Explorer Sport Trac Front Sway Bar Link Kit Pair (Moog)
  • 1998-2011 Ford Ranger Front Sway Bar Link Kit Pair (Moog)
  • 2001-2008 Mazda B2300 Truck Front Sway Bar Link Kit Pair (Moog)
  • 1998-2001 Mazda B2500 Truck Front Sway Bar Link Kit Pair (Moog)
  • 1998-2007 Mazda B3000 Truck Front Sway Bar Link Kit Pair (Moog)
  • 1998-2008 Mazda B4000 Truck Front Sway Bar Link Kit Pair (Moog)
  • 1997-2010 Mercury Mountaineer Front Sway Bar Link Kit Pair (Moog)
$45.45
Part #: MGSFK00003

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
MOOG
Brand #: K7275

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est