Replaces

1999-2004 Honda Odyssey Front Sway Bar Link Pair

Part Details

  • Location: Front

This part replaces:

  • OE # 06513-S0X-A00, 51320S0XA02 x2

  • New

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time ball joint ends can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Direct replacements
  • Replaces dealer part numbers: 06513 S0X A00, 51320 S0X A02, 06513S0XA00, 51320S0XA02
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (1:05 in the video)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • If the wheel is frozen in place, kick the tire to loosen it
  2. Removing the Stabilizer Link (1:41 in the video)
    • Apply penetrating oil to the stabilizer link bolts
    • Attach an 18mm wrench to the back of the top stabilizer link bolt
    • Remove the top 18mm nut with a socket and ratchet
    • Pull out the top stabilizer link stud
    • Attach an 18mm wrench to the back of the bottom stabilizer link bolt
    • Remove the bottom 18mm nut with a second 18mm wrench
    • Pull out the stabilizer link
  3. Installing the New Stabilizer Link (3:30 in the video)
    • Push the lower stabilizer link stud into place
    • Push the upper stabilizer link stud into place
    • Start the two 18mm nuts
    • Tighten the nuts to between 55 - 60 foot-pounds of torque
  4. Reattaching the Wheel (4:05 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 95 - 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Penetrating Oil

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands

  • Wrenches - Metric

  • 18mm Wrench

How-to Video:

(04:52 min)

Tools List:

    Materials, Fluids, and Supplies

  • Penetrating Oil

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands

  • Wrenches - Metric

  • 18mm Wrench



This part replaces:

  • OE # 06513-S0X-A00, 51320S0XA02 x2

Vehicle Fit

  • 2001-2005 Acura MDX Front Sway Bar Link Pair
  • 1999-2004 Honda Odyssey Front Sway Bar Link Pair
  • 2003-2005 Honda Pilot Front Sway Bar Link Pair
$33.95
Save 67%
List: $103.94 Save: $69.99
Part #: 1ASFK00237

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est